2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers
DriverMotor
TyTDobby/ControlPlatform- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 32
- Pads
- 86
- Tracks, vias
- 275, 19
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 May 2017
- Updated
- 11 May 2017
Overview
DriverMotor is an open-source printed circuit board by TyTDobby, from the TyTDobby/ControlPlatform repository on GitHub. It is a 2-layer board with 14 parts on 32 nets, routed with 275 tracks and 19 vias.
It is built around the L293D. Its parts include 11 connectors and 3 ICs.
Main components
1README
scemaAndPCB/driverMotor/readme.md**Плата и схема драйвера двигателей
**Kicad
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J2, J3, J4, J9, J10, J11 |
| 4 | CONN_01X03 | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | J1, J6, J7, J8 |
| 3 | L293D | Housings_DIP:DIP-16_W7.62mm_LongPads | U1, U2, U3 |
| 1 | Screw_Terminal_1x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J5 |
Questions
What parts does the DriverMotor use?
14 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverMotor KiCad files?
From the TyTDobby/ControlPlatform repository on GitHub, at the commit this page was made from: the board is scemaAndPCB/driverMotor/driverMotor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverMotor design in my own project?
Its repository states no licence, so its author keeps all rights: ask TyTDobby before reusing the design.
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
