4 layers91 × 53.1 mm
Nff pcb
o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
184 parts300
2 layers50.5 × 30.5 mm
Pinky
tylers555/PinkyPinky microcontroller board
- Size
- 50.5 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 41
- Pads
- 132
- Tracks, vias
- 268, 27
- Pours
- 145
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Jun 2024
- Updated
- 21 Jun 2024
Overview
Pinky is an open-source printed circuit board by tylers555, from the tylers555/Pinky repository on GitHub. It is a 2-layer board of 50.5 × 30.5 mm with 31 parts on 41 nets, routed with 268 tracks and 27 vias.
It is built around the CH340C. Its parts include 10 connectors, 5 capacitors, 5 diodes, 4 resistors and 3 ICs. It belongs with the PIC boards of this library.
Main components
1Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3, C5 |
| 3 | Conn_01x04_Socket | s4b:CONN_S4B-PH-SM4-TBLFSN_JST | J4, J5, J6 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R7 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D5 |
| 1 | +Batt | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm | J1 |
| 1 | -Batt | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm | J2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C_out2 |
| 1 | 150n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C_in1 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | 5Vstat | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J11 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J7 |
| 1 | Gstat | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | PIC16F15243-I_SS | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | IC1 |
| 1 | PWR stat | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | personal:CONN_10118192-0002LF_AMP | J8 |
| 1 | ZXTR2105FQ-7 | Package_TO_SOT_SMD:SOT-23-3 | IC2 |
Questions
How big is the Pinky PCB?
It measures 50.5 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pinky use?
31 parts, built around the CH340C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pinky KiCad files?
From the tylers555/Pinky repository on GitHub, at the commit this page was made from: the board is Pinky.kicad_pcb and its schematic MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pinky design in my own project?
Its repository states no licence, so its author keeps all rights: ask tylers555 before reusing the design.
Similar boards
- 2 layers66.8 × 34 mm
- 2 layers13.7 × 21.4 mm
- 2 layers192.4 × 50 mm
- 2 layers84.2 × 52 mm
- 4 layers43 × 49 mm
- 2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0 - 2 layers85 × 56 mm
