Skip to the content
2 layers100 × 50 mmSimpleBJTtia, the printed circuit board in 3D
Size
100 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
10
Pads
79
Tracks, vias
52, 310
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Feb 2025
Updated
18 Jan 2026

Overview

SimpleBJTtia is an open-source printed circuit board by TychoJ, from the TychoJ/simpleBJTtia repository on GitHub. It is a 2-layer board of 100 × 50 mm with 23 parts on 10 nets, routed with 52 tracks and 310 vias.

It is built around the MMBFJ112 and BC847. Its parts include 6 resistors, 5 capacitors, 4 connectors and 3 transistors.

Main components

2

Parts

23
QtyValueFootprintReferences
4MountingHole_Pad_MPMountingHole:MountingHole_3mm_Pad_ViaH1, H2, H3, H4
21kResistor_SMD:R_0805_2012MetricR2, R5
21uCapacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C1, C4
2Conn_CoaxialConnector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_HorizontalJ3, J4
2MMBFJ112Package_TO_SOT_SMD:SOT-23Q1, Q2
1+10Vfootprints:CT3149-2J1
1100Resistor_SMD:R_0805_2012MetricR1
1100kResistor_SMD:R_0805_2012MetricR6
1100nCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C5
110nCapacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C3
11MegResistor_SMD:R_0805_2012MetricR4
1470kResistor_SMD:R_0805_2012MetricR3
1BC847Package_TO_SOT_SMD:SOT-23Q3
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TBDCapacitor_SMD:C_0603_1608MetricC6
1gndfootprints:CT3149-0J2

More from TychoJ/simpleBJTtia

5
  • 4 layers240 × 100 mmSimpleBJTtia, the printed circuit board in 3D

    SimpleBJTtia

    TychoJ/simpleBJTtia

    122 parts
  • 2 layers100 × 50 mmSimpleBJTtia, the printed circuit board in 3D

    SimpleBJTtia

    TychoJ/simpleBJTtia

    28 parts
  • 2 layers50 × 50 mmV2Cheap, the printed circuit board in 3D

    V2Cheap

    TychoJ/simpleBJTtia

    26 parts
  • 2 layers100 × 50 mmHowNotTo, the printed circuit board in 3D

    HowNotTo

    TychoJ/simpleBJTtia

    22 parts

Similar boards

  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66
  • 2 layers152.3 × 128.5 mmCv depot, the printed circuit board in 3D

    Cv depot

    naokiiwakami/cv-depot

    Source of control voltages for euro rack synth system

    206 parts1MIT
  • 4 layers149.6 × 63.5 mmEsp p148-3way crossover retuned quad smd, the printed circuit board in 3D

    Esp p148-3way crossover retuned quad smd

    nict41/crossover

    An EasyEDA-importable schematic for the 3-way state variable electronic crossover from Elliott Sound Products Project 148 ( ), redrawn from Figure 2.

    90 parts
  • 2 layers38 × 110 mmParadox, the printed circuit board in 3D

    Paradox

    odeliy/noise-reap

    118 parts37
  • 2 layers213.5 × 128.5 mmAnalog via, the printed circuit board in 3D

    Analog via

    starlingcode/analog-via

    Designs for an all-analog variant of the VIA meta crossfader

    708 parts
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244

Questions

How big is the SimpleBJTtia PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SimpleBJTtia use?

23 parts, built around the MMBFJ112 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SimpleBJTtia KiCad files?

From the TychoJ/simpleBJTtia repository on GitHub, at the commit this page was made from: the board is hardware/v2/v2.kicad_pcb and its schematic hardware/V4/4resTia.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SimpleBJTtia design in my own project?

Its repository states no licence, so its author keeps all rights: ask TychoJ before reusing the design.