4 layers50 × 50 mm
2 layers81.7 × 59.9 mm
Arm devboard mke
twitchyliquid64/archive1Where old/crappy repos go - to avoid github clutter
- Size
- 81.7 × 59.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 30
- Pads
- 89
- Tracks, vias
- 217, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Oct 2016
- Updated
- 11 Oct 2018
Overview
Arm devboard mke is an open-source printed circuit board by twitchyliquid64, from the twitchyliquid64/archive repository on GitHub. It is a 2-layer board of 81.7 × 59.9 mm with 27 parts on 30 nets, routed with 217 tracks and 24 vias.
It is built around the MKE04Z8VWJ4. Its parts include 8 resistors, 5 connectors, 3 capacitors, 3 diodes and 2 transistors. It belongs with the microcontroller boards boards of this library.
Main components
1Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistors_SMD:R_0805_HandSoldering | R3, R4, R5, R8 |
| 2 | 0R | Resistors_SMD:R_0805_HandSoldering | R6, R7 |
| 2 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1, C3 |
| 2 | LED | LEDs:LED_0805 | D1, D3 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 22uF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 500R | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | GPIO | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P4 |
| 1 | Led_RGB_CA | esp12-prog:4PLED+ | D2 |
| 1 | MKE04Z8VWJ4 | Housings_SOIC:SOIC-20W_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | POT | Potentiometers:Potentiometer_Trimmer-Suntan-TSR-3386P | RV1 |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P1 |
| 1 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q2 |
| 1 | Q_NPN_BCE | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | SPEAKER | Buzzers_Beepers:MagneticBuzzer_ProSignal_ABT-410-RC | SP1 |
| 1 | SPECIAL | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P5 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P2 |
| 1 | SW_PUSH_SMALL | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P3 |
The 25 most common of 27 parts.
Questions
How big is the Arm devboard mke PCB?
It measures 81.7 × 59.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arm devboard mke use?
27 parts, built around the MKE04Z8VWJ4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arm devboard mke KiCad files?
From the twitchyliquid64/archive repository on GitHub, at the commit this page was made from: the board is armmke_dev1/arm_devboard_mke.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arm devboard mke design in my own project?
Its repository states no licence, so its author keeps all rights: ask twitchyliquid64 before reusing the design.
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0