Skip to the content
2 layers106.5 × 43.5 mmGps adapter, the printed circuit board in 3D

PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

Size
106.5 × 43.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
40
Pads
76
Tracks, vias
79, 27
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jan 2021
Updated
3 Aug 2024

Overview

Gps adapter is an open-source printed circuit board by Twisted-Fields, from the Twisted-Fields/acorn-robot-electronics repository on GitHub. It is a 2-layer board of 106.5 × 43.5 mm with 12 parts on 40 nets, routed with 79 tracks and 27 vias.

Its parts include 2 ICs and 1 connector. It belongs with the radio and wireless and robots and motor control boards of this library.

README

cm4_robot_board/README.md

Acorn Raspberry Pi Motherboard

About

This is the motherboard design used on Acorn, the precision farming rover from Twisted Fields.

This board provides motor control communication to four Odrive motor controllers via RS-485, e-stop control, motor power control, and more.

For more information please see http://community.twistedfields.com

Parts

12
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.7mmH1, H2, H3, H4
2GPS-RTK-SMAgps:GPS-RTK-SMAU1, U2
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
1LOGOtaylor_footprints:twisted_iconG***
1LOGOtaylor_footprints:twisted_2G***
1LOGOtaylor_footprints:twistedG***
1Serial InputConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ3

More from Twisted-Fields/acorn-robot-electronics

7
  • 4 layers118 × 117 mmCm4-robot, the printed circuit board in 3D

    Cm4-robot

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    268 parts81
  • 2 layers127.5 × 95 mmAcorn motherboard, the printed circuit board in 3D

    Acorn motherboard

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    217 parts81
  • 4 layers109 × 155.5 mmSupercap, the printed circuit board in 3D

    Supercap

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    198 parts81
  • 4 layers62 × 65.5 mmSoft start, the printed circuit board in 3D

    Soft start

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    65 parts81
  • 4 layers80 × 156 mmSupercap simple, the printed circuit board in 3D

    Supercap simple

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    56 parts81
  • 2 layers210 × 60 mmSupercap (copy), the printed circuit board in 3D

    Supercap (copy)

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    48 parts81
  • 2 layers36 × 22 mmMag sensor, the printed circuit board in 3D

    Mag sensor

    Twisted-Fields/acorn-robot-electronics

    PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

    9 parts81

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Gps adapter PCB?

It measures 106.5 × 43.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gps adapter use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gps adapter KiCad files?

From the Twisted-Fields/acorn-robot-electronics repository on GitHub, at the commit this page was made from: the board is gps_adapter/gps_adapter.kicad_pcb and its schematic cm4_robot_board/cm4-robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gps adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask Twisted-Fields before reusing the design.