Skip to the content
2 layers142.5 × 141.8 mmPSU, the printed circuit board in 3D

test mini rack psu

Size
142.5 × 141.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
59
Pads
345
Tracks, vias
704, 79
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Sep 2026
Updated
9 Sep 2026

Overview

PSU is an open-source printed circuit board by tuxy, from the tuxy/psu repository on GitHub. It is a 2-layer board of 142.5 × 141.8 mm with 81 parts on 59 nets, routed with 704 tracks and 79 vias.

It is built around the MP1584EN, SMBJ26A and SMCJ26A. Its parts include 27 capacitors, 11 connectors, 10 resistors, 7 ICs and 7 diodes. It belongs with the power boards and the RP2040 boards of this library.

Main components

3

Parts

81
QtyValueFootprintReferences
120.1uFCapacitor_SMD:C_0603_1608MetricC3, C6, C9, C12, C15, C18, C22, C23, C24, C25, C26, C27
71uFCapacitor_SMD:C_1206_3216MetricC2, C5, C8, C11, C14, C17, C21
7470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C4, C7, C10, C13, C16, C20
610AFuse:Fuse_1206_3216MetricF1, F2, F3, F4, F5, F6
610kResistor_SMD:R_1206_3216MetricR5, R6, R7, R8, R9, R10
6Conn_01x02_PinTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ2, J3, J4, J5, J6, J7
6INA260Package_SO:TSSOP-16_4.4x5mm_P0.65mmU1, U2, U3, U4, U5, U6
6SMBJ26ADiode_SMD:D_SMBD1, D2, D3, D4, D5, D6
6SolderJumper_2_OpenResistor_SMD:R_2512_6332MetricJP1, JP2, JP3, JP4, JP5, JP6
42.2kResistor_SMD:R_1206_3216MetricR1, R2, R3, R4
4M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2Conn_01x02_SocketConnector_Wire:SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mmJ1, J13
2Conn_02x01Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_HorizontalJ9, J10
11000uFCapacitor_THT:CP_Radial_D16.0mm_P7.50mmC19
130AFuse:Fuseholder_Keystone_3555-2F7
1Fan_4pinConnector:FanPinHeader_1x04_P2.54mm_VerticalM1
1MP1584ENBoards:MP1584ENJ14
1RaspberryPi_PicoModule:RaspberryPi_Pico_Common_UnspecifiedA1
1SMCJ26ADiode_SMD:D_SMCD7
1~Boards:W5500LiteU7

More from tuxy/psu

1
  • 2 layers59.4 × 151.4 mmBreakout, the printed circuit board in 3D

    Breakout

    tuxy/psu

    test mini rack psu

    17 parts

Similar boards

  • 2 layers79 × 89 mmBms v1, the printed circuit board in 3D

    Bms v1

    azerimaker/BMS_3-5S

    3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.

    175 parts22
  • 4 layers70 × 157.5 mmController Tv Lift, the printed circuit board in 3D

    Controller Tv Lift

    vyrubaev/TV-Lift-Controller

    TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.

    103 parts
  • 2 layers114.5 × 106 mmManipulator electronic, the printed circuit board in 3D

    Manipulator electronic

    MSolovtsov/manipulator_electronic

    Подпроект «Электроника» проекта «Манипулятор для лабораторных работ». Подключён как Git submodule к родительскому репозиторию educational-manipulator.

    23 parts
  • 2 layers70 × 65 mmIgnitor driver, the printed circuit board in 3D

    Ignitor driver

    Queens-Rocket-Engineering-Team/gse-control-node

    The GSE control node is the control PCB for GSE systems to integrate with launch control. This includes actuator control, fan control, and a load cell reading.

    54 parts
  • 4 layers38 × 39 mmCLN17-V1.5, the printed circuit board in 3D

    CLN17-V1.5

    creapunk/CLN-ClosedLoopNemaDriver

    Compact closed-loop stepper motor driver designed for NEMA motors

    103 parts1.1k
  • 6 layers100 × 120 mmAstra piNas, the printed circuit board in 3D

    Astra piNas

    jlcjak/astra_piNas

    Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.

    176 parts30
  • 4 layers250.4 × 131 mmPanel-16, the printed circuit board in 3D

    Panel-16

    geezacoleman/owl-driver-board

    Development of a board that receives GPIO input and allows on/off control of connected solenoids.

    939 parts14MIT
  • 4 layers55 × 35 mmCarrier, the printed circuit board in 3D

    Carrier

    jonsole/toyotune

    Daughter-board for reprogramming 1990's Toyota ECUs

    30 parts8GPL-3.0

Questions

How big is the PSU PCB?

It measures 142.5 × 141.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PSU use?

81 parts, built around the MP1584EN, SMBJ26A and SMCJ26A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PSU KiCad files?

From the tuxy/psu repository on GitHub, at the commit this page was made from: the board is PSU.kicad_pcb and its schematic Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PSU design in my own project?

Its repository states no licence, so its author keeps all rights: ask tuxy before reusing the design.