

PSU
test mini rack psu
- Size
- 142.5 × 141.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 59
- Pads
- 345
- Tracks, vias
- 704, 79
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Sep 2026
- Updated
- 9 Sep 2026
Overview
PSU is an open-source printed circuit board by tuxy, from the tuxy/psu repository on GitHub. It is a 2-layer board of 142.5 × 141.8 mm with 81 parts on 59 nets, routed with 704 tracks and 79 vias.
It is built around the MP1584EN, SMBJ26A and SMCJ26A. Its parts include 27 capacitors, 11 connectors, 10 resistors, 7 ICs and 7 diodes. It belongs with the power boards and the RP2040 boards of this library.
Main components
3MP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersSMBJ26A
DO-214AA(SMB)-65℃~+150℃ 14.3A 1uA 26V 31.9V 42.1V 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SMCJ26A
SMC-55℃~+150℃ 1.5kW@10/1000us 1uA 26V 31.9V 35.7A@10/1000us 42.1V TVS SMC ESD and Surge Protection (TVS/ESD) ROHSShandong Jingdao MicroelectronicsESD And Surge Protection (TVS/ESD)
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C9, C12, C15, C18, C22, C23, C24, C25, C26, C27 |
| 7 | 1uF | Capacitor_SMD:C_1206_3216Metric | C2, C5, C8, C11, C14, C17, C21 |
| 7 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C4, C7, C10, C13, C16, C20 |
| 6 | 10A | Fuse:Fuse_1206_3216Metric | F1, F2, F3, F4, F5, F6 |
| 6 | 10k | Resistor_SMD:R_1206_3216Metric | R5, R6, R7, R8, R9, R10 |
| 6 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2, J3, J4, J5, J6, J7 |
| 6 | INA260 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2, U3, U4, U5, U6 |
| 6 | SMBJ26A | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6 |
| 6 | SolderJumper_2_Open | Resistor_SMD:R_2512_6332Metric | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 2.2k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | Conn_01x02_Socket | Connector_Wire:SolderWire-6sqmm_1x02_P14mm_D3.5mm_OD7mm | J1, J13 |
| 2 | Conn_02x01 | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J9, J10 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C19 |
| 1 | 30A | Fuse:Fuseholder_Keystone_3555-2 | F7 |
| 1 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1 |
| 1 | MP1584EN | Boards:MP1584EN | J14 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SMCJ26A | Diode_SMD:D_SMC | D7 |
| 1 | ~ | Boards:W5500Lite | U7 |
More from tuxy/psu
1- 2 layers59.4 × 151.4 mm

Similar boards
- 2 layers79 × 89 mm

Bms v1
azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.
175 parts22 - 4 layers70 × 157.5 mm

Controller Tv Lift
vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.
103 parts - 2 layers114.5 × 106 mm

Manipulator electronic
MSolovtsov/manipulator_electronic
Подпроект «Электроника» проекта «Манипулятор для лабораторных работ». Подключён как Git submodule к родительскому репозиторию educational-manipulator.
23 parts - 2 layers70 × 65 mm

Ignitor driver
Queens-Rocket-Engineering-Team/gse-control-node
The GSE control node is the control PCB for GSE systems to integrate with launch control. This includes actuator control, fan control, and a load cell reading.
54 parts - 4 layers38 × 39 mm

CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k - 6 layers100 × 120 mm

Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 4 layers250.4 × 131 mm

Panel-16
geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.
939 parts14MIT - 4 layers55 × 35 mm

Questions
How big is the PSU PCB?
It measures 142.5 × 141.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU use?
81 parts, built around the MP1584EN, SMBJ26A and SMCJ26A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU KiCad files?
From the tuxy/psu repository on GitHub, at the commit this page was made from: the board is PSU.kicad_pcb and its schematic Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU design in my own project?
Its repository states no licence, so its author keeps all rights: ask tuxy before reusing the design.