Skip to the content
2 layers93.6 × 43.7 mmDell psu spoofer, the printed circuit board in 3D

Allows user to use any lab power supply to power a Dell or Alienware notebook pc by supplying the required Dell PSU ID string. Dell and Alienware computers require the ID string to run normally. Performance is throttled if no ID string is provided for power protection purposes.

Size
93.6 × 43.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
11
Pads
40
Tracks, vias
81, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Mar 2026
Updated
18 Apr 2026

Overview

Dell psu spoofer is an open-source printed circuit board by ttfsapps, from the ttfsapps/dell-alienware-psu-spoofer repository on GitHub. It is a 2-layer board of 93.6 × 43.7 mm with 16 parts on 11 nets, routed with 81 tracks and 0 vias.

It is built around the ATTINY85-20PU and 1N5817-T. Its parts include 3 resistors, 2 capacitors, 2 ICs, 2 diodes and 2 connectors. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Dell/Alienware PSU Spoofer

Allows user to use any lab power supply to power a Dell or Alienware notebook pc by supplying the required Dell PSU ID string. Dell and Alienware computers require the ID string to run normally. Performance is throttled if no ID string is provided for power protection purposes. The spoofer is configurable to send the ID string that matches the input lab supply's power rating via dipswitches.

Hardware Required

Custom PCB design which uses an Atmel ATtiny85 microcontroller and OneWireHub to emulate a Maxim DS2502, a 1Kb Add-Only Memory device with a unique 48-bit serial number, programmable EPROM, and 1-Wire interface. The DS2502 is used by Dell and Alienware OEM PSU's to determine the PSU's wattage. It appears that the notebook pc's do not use any of the other information provided in the Dell ID string other than wattage.

KiCad Files

KiCad Schematic

KiCad PCB

KiCad BOM

Gerber File

KiCad BOM

Libraries Required

LibraryFunction
OneWireHub.hOneWireHub library
DS2502.hincluded with OneWireHub library

DIP Switch Settings

ABCWatts
00075
001100
010125
011150
100175
101200
110225
111250

Pin Names, Numbers, and Functions

ATtiny85 Pin517632ATtiny85 hardware pin numbers (reference only)
Pin NamePB0PB5/RSTPB2PB1PB4PB3ATtiny85/Arduino pin names
Arduino Pin #052143Arduino IDE pin numbers (s/w uses these)
PCB LabelLEDRSTIDABCPin function
Functionnot usedOneWirePower SelectPower SelectPower Select

TTFS Apps 2026

Parts

16
QtyValueFootprintReferences
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
1.1uFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2
1.33uFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
11N5817-TDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
1ATTINY85-20PUPackage_DIP:DIP-8_W7.62mm_SocketU2
1L78L33_TO92Package_TO_SOT_THT:TO-92_InlineU1
1Molex KK-254My_KiCad_Library:KK-254 CONN HEADER RA 2POS 2.54MMJ1
1Molex KK-254My_KiCad_Library:KK-254 CONN HEADER RA 3POS 2.54MMJ2
1REDLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD1
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W7.62mm_P2.54mm_LowProfileSW1

The 12 most common of 16 parts.

Similar boards

  • 2 layers79.1 × 77.7 mmKim-1-programmable memory, the printed circuit board in 3D

    Kim-1-programmable memory

    eduardocasino/kim-1-programmable-memory-card

    KIM-1 Programmable Memory Board for the MTU Backplane

    36 parts11
  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers76.2 × 50.8 mmJerboa-8, the printed circuit board in 3D

    Jerboa-8

    strickyak/jerboa-attiny85-mod-synth

    Modular Synthesizer using an ATtiny85 chip for each module.

    23 parts31MIT
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers55.9 × 55.9 mmPrintplaat, the printed circuit board in 3D

    Printplaat

    floriaanpost/wonderfoon

    Een nieuwe implementatie van de wonderfoon

    14 parts24
  • 2 layers71.1 × 40.6 mmTiny blinky, the printed circuit board in 3D

    Tiny blinky

    Hack-a-Day/Remoticon_KiCad_Blender

    support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

    21 parts22

Questions

How big is the Dell psu spoofer PCB?

It measures 93.6 × 43.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dell psu spoofer use?

16 parts, built around the ATTINY85-20PU and 1N5817-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dell psu spoofer KiCad files?

From the ttfsapps/dell-alienware-psu-spoofer repository on GitHub, at the commit this page was made from: the board is kicad/dell_psu_spoofer.kicad_pcb and its schematic kicad/dell_psu_spoofer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dell psu spoofer design in my own project?

Its repository states no licence, so its author keeps all rights: ask ttfsapps before reusing the design.