
Fugu2
fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

5V/3.3V/1.8V Breadboard Power Supply
Breadboard Power Supply is an open-source printed circuit board by tstills, from the tstills/Breadboard-Power-Supply repository on GitHub. It is a 4-layer board of 53.6 × 28.8 mm with 83 parts on 51 nets, routed with 351 tracks and 39 vias.
It is built around the INA180A1IDBVR(LX), AP3012KTR-G1 and LM393, with the LM1117-ADJ among its other parts. Its parts include 31 resistors, 17 capacitors, 10 ICs, 7 connectors and 6 diodes. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C7, C8, C9, C11, C12, C13, C14, C15, C16, C17 |
| 8 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R17, R21, R22, R23, R24, R28, R30, R33 |
| 5 | ~ | Global-Footprints:LED 0603 | D2, D3, D4, D5, D6 |
| 4 | 0.1Ω | Resistor_SMD:R_0402_1005Metric | R15, R16, R25, R26 |
| 4 | 200mA Fuse | Local Footprints:Resettable Fuse 200mA | F1, F2, F3, F4 |
| 4 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | 470 | Resistor_SMD:R_0402_1005Metric | R10, R11, R14, R27 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J9, J10, J11 |
| 4 | INA180A1IDBVR | Local Footprints:INA180A1IDBVR | U3, U6, U8, U10 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C10 |
| 3 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R3, R20, R29 |
| 3 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R1, R2, R13 |
| 3 | LM393 | Local Footprints:LM393 DFN8 | U5, U7, U9 |
| 2 | 100uF | Global-Footprints:100uF 6.3V Capacitor | C5, C6 |
| 2 | 22kΩ | Resistor_SMD:R_0402_1005Metric | R9, R12 |
| 2 | 4x2 Header | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J4, J5 |
| 2 | LM1117-ADJ | Global-Footprints:LM1117-ADJ | U1, U2 |
| 2 | TestPoint_2Pole | Global-Footprints:Keystone 1430 | TP1, TP4 |
| 1 | 100uF | Global-Footprints:100uF 16V Capacitor | C2 |
| 1 | 100Ω | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 120Ω | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 150Ω | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123F | D1 |
| 1 | 22uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 270Ω | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 330Ω | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 390Ω | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 47kΩ | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | AP3012KTR-G1 | Global-Footprints:SOT-23-5_DIO | U4 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | SYM1 |
| 1 | USB-C Power Only | Global-Footprints:USB-C Power Only | J1 |

fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

Dooganar/engg3800-t3-eaar-pcb-design
A repo used to track and collaborate on the pcb design for the University of Queensland "Team Project II" course.

virtual-fly/VF_MOTOR_DRIVER
VF_Motor_Driver is an open hardware power distribution board, designed to be part of a larger modular system. This design is based in part on the OpenFFBoard TMC4671 driver board, licensed under the GNU General Public…





It measures 53.6 × 28.8 mm and has 4 copper layers, 1.6 mm thick.
83 parts, built around the INA180A1IDBVR(LX), AP3012KTR-G1, LM393 and LM1117-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tstills/Breadboard-Power-Supply repository on GitHub, at the commit this page was made from: the board is Breadboard Power Supply.kicad_pcb and its schematic Breadboard Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tstills before reusing the design.