2 layers229.3 × 91.2 mm
2 layers252.7 × 90.5 mm
Hacktrick
Tschibo00/qmk33This repo contains the QMK files for my keyboards # qmk
- Size
- 252.7 × 90.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 59
- Pads
- 401
- Tracks, vias
- 346, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Nov 2023
- Updated
- 17 Dec 2025
Overview
Hacktrick is an open-source printed circuit board by Tschibo00, from the Tschibo00/qmk repository on GitHub, published under the MIT licence. It is a 2-layer board of 252.7 × 90.5 mm with 74 parts on 59 nets, routed with 346 tracks and 0 vias.
Its parts include 34 diodes, 33 switches, 4 connectors, 2 resistors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdThis repo contains the QMK files for my keyboards
qmk
WARNING
This project is a personal project, i just built one prototype. It's not considered complete, nor tested or error-free.
I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.
It is NOT ready to take the files and produce a working keyboard!
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +18 |
| 33 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_Plated_1.00u | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +17 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LED1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LED2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RP2040_Zero | ScottoKeebs_MCU:RP2040_Zero | U1 |
| 1 | encoder push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
Questions
How big is the Hacktrick PCB?
It measures 252.7 × 90.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hacktrick use?
74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hacktrick KiCad files?
From the Tschibo00/qmk repository on GitHub, at the commit this page was made from: the board is hacktrick/pcb/hacktrick.kicad_pcb and its schematic chaotist/pcb/chaotist.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hacktrick design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Tschibo00/qmk
6- 2 layers244 × 112.7 mm
- 2 layers269.2 × 62.2 mm
- 2 layers240.4 × 136.6 mm
- 2 layers225 × 91.7 mm
- 2 layers240.4 × 118.5 mm
Similar boards
- 2 layers141.1 × 126.8 mm
Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
74 parts915 - 2 layers49 × 44 mm
Simple keeb reuser
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
74 parts253GPL-3.0 - 2 layers49 × 49 mm
OSBMS Balancer Rev1 sot323
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
74 parts248 - 2 layers72.4 × 72.4 mm
SerialResonantFilter
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
74 parts222 - 2 layers58 × 65 mm
- 2 layers110 × 60 mm
Arduino Spot Welder
KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.
74 parts207GPL-3.0 - 2 layers51.5 × 89 mm
- 2 layers165.7 × 152.4 mm
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
74 parts184