Skip to the content
2 layers22 × 27 mmAccelerometer and Gryoscope Sensor Module, the printed circuit board in 3D

Accelerometer and Gryoscope Sensor Module

tsanthosh1328-coder/pcb-designs

A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

Size
22 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
24
Pads
61
Tracks, vias
117, 3
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 May 2026
Updated
30 May 2026

Overview

Accelerometer and Gryoscope Sensor Module is an open-source printed circuit board by tsanthosh1328-coder, from the tsanthosh1328-coder/pcb-designs repository on GitHub. It is a 2-layer board of 22 × 27 mm with 16 parts on 24 nets, routed with 117 tracks and 3 vias.

It is built around the AP2112K-3.3 and MPU-6050. Its parts include 7 capacitors, 3 resistors, 2 ICs, 1 diode and 1 connector. It belongs with the sensors and measurement boards of this library.

Main components

2

README

README.md

pcb-designs

A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

Parts

16
QtyValueFootprintReferences
30.1ufCapacitor_SMD:C_0805_2012MetricC3, C5, C6
24.7KResistor_SMD:R_0805_2012MetricR2, R3
10.01ufCapacitor_SMD:C_0805_2012MetricC4
110ufCapacitor_SMD:C_0805_2012MetricC2
11KResistor_SMD:R_0805_2012MetricR1
12200pfCapacitor_SMD:C_0805_2012MetricC7
14.7ufCapacitor_SMD:C_0805_2012MetricC1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U1
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1LEDLED_SMD:LED_0805_2012MetricD1
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU2

The 14 most common of 16 parts.

More from tsanthosh1328-coder/pcb-designs

4
  • 2 layers41 × 30 mmSmoke Sensor Module, the printed circuit board in 3D

    Smoke Sensor Module

    tsanthosh1328-coder/pcb-designs

    A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

    19 parts
  • 2 layers48.5 × 40.5 mmKeypad 4x4, the printed circuit board in 3D

    Keypad 4x4

    tsanthosh1328-coder/pcb-designs

    A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

    17 parts
  • 2 layers34.5 × 18 mmIR Sensor Module, the printed circuit board in 3D

    IR Sensor Module

    tsanthosh1328-coder/pcb-designs

    A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

    15 parts
  • 2 layers36 × 18.5 mmLDR Sensor Module, the printed circuit board in 3D

    LDR Sensor Module

    tsanthosh1328-coder/pcb-designs

    A collection of PCB designs created using KiCad 10. Includes schematics, PCB layouts, and Gerber files ready for manufacturing.

    13 parts

Similar boards

  • 2 layers40 × 40 mmEsp32Drone, the printed circuit board in 3D

    Esp32Drone

    HexaBitsEdu/ESP32-MiniDrone

    this project is a drone based on esp32 microcontroller and coreless DC motor

    83 parts2
  • 2 layers60 × 56 mmVibrationDT, the printed circuit board in 3D

    VibrationDT

    adityarawat1223/Vibration-Detector

    Vibration diagnostic tool using STM32 bare-metal C, on-chip FFT, and custom PCB hardware for bearing fault detection.

    35 parts1
  • 2 layers25.4 × 17.8 mmAdafruit MPU6050, the printed circuit board in 3D

    Adafruit MPU6050

    yeyfreya/TECHIN514-Final-Project

    28 parts1MIT
  • 2 layers100 × 75 mmAeroFC, the printed circuit board in 3D

    AeroFC

    angelowickramasinghe/Project-Drone

    AeroFC-1S 1S brushed micro-quad flight controller (KiCad) — schematic, PCB, Gerbers, LCSC BOM

    57 parts
  • 4 layersAstra Companion, the printed circuit board in 3D

    Astra Companion

    atireksd11/Astra-Companion

    This repo holds the carrier PCB, the voice stack on the laptop, and notes for building Astra. Week 1 was the KiCad board.

    96 parts
  • 2 layers31.6 × 57.6 mmRocket.Sim, the printed circuit board in 3D

    Rocket.Sim

    BearsBearsBearsT-T/ESP32-Rocket-Sim-PCB

    An MPU and ESP32 powered PCB that tracks motion in real time.

    19 parts
  • 2 layers224.6 × 135 mmMoveIt PCB - BELLAICHE Chloé, the printed circuit board in 3D

    MoveIt PCB - BELLAICHE Chloé

    Calinoux7/MoveIt_PCB

    Motion Game Controller PCB designed with KiCad 10 – ESP32-S3, MPU-6050, OLED display and I2S audio.

    27 parts

Questions

How big is the Accelerometer and Gryoscope Sensor Module PCB?

It measures 22 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Accelerometer and Gryoscope Sensor Module use?

16 parts, built around the AP2112K-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Accelerometer and Gryoscope Sensor Module KiCad files?

From the tsanthosh1328-coder/pcb-designs repository on GitHub, at the commit this page was made from: the board is Accelerometer_and_Gryoscope_Sensor_Module/Accelerometer_and_Gryoscope_Sensor_Module.kicad_pcb and its schematic Accelerometer_and_Gryoscope_Sensor_Module/Accelerometer_and_Gryoscope_Sensor_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Accelerometer and Gryoscope Sensor Module design in my own project?

Its repository states no licence, so its author keeps all rights: ask tsanthosh1328-coder before reusing the design.