4 layers36.5 × 69 mm
Storm tracker
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package
102 parts58
2 layers21.6 × 30.1 mm
Eink Driver
trmint195/eink-driver-kicad- Size
- 21.6 × 30.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 26
- Pads
- 86
- Tracks, vias
- 206, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 May 2026
- Updated
- 12 May 2026
Overview
Eink Driver is an open-source printed circuit board by trmint195, from the trmint195/eink-driver-kicad repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.6 × 30.1 mm with 46 parts on 26 nets, routed with 206 tracks and 18 vias.
It is built around the MBR0530 and AO3400A. Its parts include 11 capacitors, 4 resistors, 3 diodes, 2 connectors and 1 transistor. It belongs with the lEDs and displays boards of this library.
Main components
2
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdeink-driver-kicad
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C6, C7, C16, C22, C23, C24 |
| 3 | MBR0530 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D4 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C15 |
| 2 | G*** | kibuzzard-69633CA3 | kibuzzard-69633CA3, kibuzzard-69633CA3 |
| 2 | G*** | kibuzzard-6963576B | kibuzzard-6963576B, kibuzzard-6963576B |
| 2 | G*** | kibuzzard-6963572A | kibuzzard-6963572A, kibuzzard-6963572A |
| 2 | G*** | kibuzzard-69635784 | kibuzzard-69635784, kibuzzard-69635784 |
| 2 | G*** | kibuzzard-6963574A | kibuzzard-6963574A, kibuzzard-6963574A |
| 2 | G*** | kibuzzard-69635758 | kibuzzard-69635758, kibuzzard-69635758 |
| 2 | G*** | kibuzzard-696357B1 | kibuzzard-696357B1, kibuzzard-696357B1 |
| 1 | 0.47ohm | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10uH | Inductor_SMD:L_Ferrocore_DLG-0403 | L2 |
| 1 | 3 ohm | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Conn_01x24 | Connector_FFC-FPC:Amphenol_F32Q-1A7x1-11024_1x24-1MP_P0.5mm_Horizontal | J1 |
| 1 | G*** | kibuzzard-696332CC | kibuzzard-696332CC |
| 1 | G*** | kibuzzard-696357DA | kibuzzard-696357DA |
| 1 | G*** | kibuzzard-69635A23 | kibuzzard-69635A23 |
| 1 | G*** | kibuzzard-6963580C | kibuzzard-6963580C |
| 1 | G*** | kibuzzard-6A014E61 | kibuzzard-6A014E61 |
| 1 | G*** | kibuzzard-696332E8 | kibuzzard-696332E8 |
| 1 | G*** | kibuzzard-69634677 | kibuzzard-69634677 |
| 1 | G*** | kibuzzard-696359C0 | kibuzzard-696359C0 |
| 1 | G*** | kibuzzard-6A03540B | kibuzzard-6A03540B |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
| 1 | ~ | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
Questions
How big is the Eink Driver PCB?
It measures 21.6 × 30.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eink Driver use?
46 parts, built around the MBR0530 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eink Driver KiCad files?
From the trmint195/eink-driver-kicad repository on GitHub, at the commit this page was made from: the board is Eink-Driver.kicad_pcb and its schematic Eink-Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eink Driver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers33.8 × 46 mm
- 2 layers84 × 98 mm
- 2 layers61.7 × 35.1 mm
- 4 layers66.5 × 50.7 mm
- 2 layers83.1 × 56.2 mm
Schematics
fulvionardi/Epaper
This project is a replication of the Waveshare 3.6inch e-Paper HAT+ schematics, originally documented in 3.6inche-PaperHAT+Schematics.pdf.
73 parts1 - 4 layers33.8 × 38 mm
Watchy MrT ESP32-S3-V1
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
86 parts1 - 2 layers38.7 × 50.6 mm
