

Module io
- Size
- 64 × 93.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 149
- Nets
- 149
- Pads
- 522
- Tracks, vias
- 1,798, 359
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Feb 2022
- Updated
- 14 Feb 2022
Overview
Module io is an open-source printed circuit board by tracetechnical, from the tracetechnical/house-plc repository on GitHub. It is a 4-layer board of 64 × 93.5 mm with 149 parts on 149 nets, routed with 1,798 tracks and 359 vias.
It is built around the MAX485ED, 74LS86 and 74HC595, with the 74LS165PC, 74LS259DC and 74LS573PC among its other parts. Its parts include 40 resistors, 28 diodes, 13 capacitors, 11 ICs and 11 connectors. It belongs with the PIC boards of this library.
Main components
8MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICs74LS86
DIP-14-20℃~+75℃ 10mA 2.7V 23ns@5V,15pF 2V 400mV 400uA 5V 74LS 800mV 8mA XOR Gate DIP-14 Logic Gates ROHSHITLogic Gates74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers74LS165PC
DIP-160.4mA 0℃~+70℃ 105mW 35MHz 4.75V~5.25V 47ns@5V,50pF 8 8mA Asynchronous parallel load function Complementary Parallel-to-Serial DIP-16 Shift RegistersTexas InstrumentsShift Registers74LS259DC
SBDIP-160.4mA 0ns 0℃~+70℃ 15ns 16ns 4.75V~5.25V 74LS 8 8mA Addressable Latch SBDIP-16 Latches ROHSTexas InstrumentsLatches74LS573PC
DIP-200℃~+70℃ 10ns 3ns 4.75V~5.25V 74LS 8 D Latch Tri-State DIP-20 Latches ROHSTexas InstrumentsLatchesULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor ArraysBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
149| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +23 |
| 19 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D1, D2, D3, D4, D5, D6, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19 +3 |
| 18 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +2 |
| 13 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 10 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 8 | Q_NPN_EBC | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q5, Q6, Q7, Q8, Q9 |
| 4 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D21, D22, D23, D24 |
| 4 | D_TVS | Diode_SMD:D_SMB_Handsoldering | D25, D26, D27, D28 |
| 4 | Polyfuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1, F2, F3, F4 |
| 2 | 74LS86 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U9, U10 |
| 2 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J9, J10 |
| 2 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 2 | RJ45_LED_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE538X | J6, J7 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40 |
| 1 | 4051 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | 74LS165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | 74LS259 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | 74LS573 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U7 |
| 1 | ANA_INH | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | CH28-2032LF | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Crystal | Crystal:Crystal_Round_D3.0mm_Vertical | Y1 |
| 1 | EOL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | HBEAT | LED_SMD:LED_0603_1608Metric_Castellated | D20 |
| 1 | ICSP | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J8 |
| 1 | INPUTS | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J4 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | OUT | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | OUTPUTS | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J5 |
| 1 | PIC16F19156-I_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | IC1 |
| 1 | Q_PNP_BEC | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | RX_SEL | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | J2 |
| 1 | TXEN_SEL | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | J1 |
| 1 | TX_SEL | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | J3 |
| 1 | ULN2003 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
More from tracetechnical/house-plc
1- 2 layers64 × 93.5 mm

Similar boards
- 2 layers150 × 150 mm

- 2 layers379.1 × 273.4 mm

NE Delta
frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics
185 parts - 4 layers194.5 × 188.6 mm

MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT - 2 layers236.8 × 169.8 mm

TK2000
clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II
212 parts17 - 2 layers486 × 306.3 mm

- 2 layers630 × 300 mm

- 2 layers

Rogelio Pineda part 7-AMLDC-2044B
ForgottenMachines/Entrex
The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.
332 parts1 - 2 layers301.5 × 367.3 mm

OSI 600D Superboard II Cherry Solder Mask
Bambelweeny57/OSI-600D-SuperBoard-II
KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.
314 parts
Questions
How big is the Module io PCB?
It measures 64 × 93.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Module io use?
149 parts, built around the MAX485ED, 74LS86, 74HC595 and 74LS165PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Module io KiCad files?
From the tracetechnical/house-plc repository on GitHub, at the commit this page was made from: the board is hardware/module-io/module-io.kicad_pcb and its schematic hardware/module-io/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Module io design in my own project?
Its repository states no licence, so its author keeps all rights: ask tracetechnical before reusing the design.