

26th PCB PitchSender
胴体桁基板
- Size
- 148.2 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 56
- Pads
- 107
- Tracks, vias
- 204, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 May 2026
- Updated
- 31 May 2026
Overview
26th PCB PitchSender is an open-source printed circuit board by torica-org, from the torica-org/26th_PCB_Fuselage repository on GitHub. It is a 2-layer board of 148.2 × 28.5 mm with 26 parts on 56 nets, routed with 204 tracks and 21 vias.
It is built around the BMP390, BNO055 and S03B-PASK-2. Its parts include 10 connectors, 3 resistors, 3 diodes and 1 IC.
Main components
3BMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsBNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometersS03B-PASK-2
弯插,P=2mmWire To Board ConnectorJST
README
README.md26th_PCB_PitchSender
胴体桁基板
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7, J8, J9, J10 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 1 | Amp | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | BMP390 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | BNO055 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | lib:JST_S04B-PASK-2_LF__SN_ | J2 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | LOGO | lib:JLCPCB(9mm) | JLCPCB_LOGO |
| 1 | LOGO | lib:REWRITE_LOGO | REWRITE_LOGO |
| 1 | S03B-PASK-2 | lib:S03B-PASK-2 | JP1 |
| 1 | Vol | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | microSD | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | ~ | lib:MODULE_ESP32-DEVKITC-32E | U1 |
Similar boards
- 2 layers34.7 × 1 mm

- 4 layers78 × 48 mm

Motherboard rev 3
hpvdt/falcon_motherboard
Firmware and hardware designs for the Falcon motherboard
69 parts - 4 layers75 × 25 mm

- 4 layers40 × 80 mm

BarbelMotionTracker V1
ThorbenH/ba-thesis-project
This git project is dedicated to a prototype implementation that attempts to track and evaluate the motion of a barbell in the gym.
123 parts - 4 layers93.7 × 43.7 mm

Flight Computer
SunDevilRocketry/Flight-Computer
General purpose flight computer for high powered rocketry projects.
113 parts5 - 4 layers70.8 × 100 mm

- 4 layers20.8 × 18 mm

Whisker
BioMorphic-Intelligence-Lab/Whisker-3D-Localization
A Biomorphic Whisker Sensor for Aerial Tactile Applications , Chaoxiang Ye, Guido de Croon, and Salua Hamaza. 2024 IEEE International Conference on Robotics and Automation (ICRA 2024).
29 parts3 - 6 layers34 × 40 mm

ESPWatchS3
Ilikemining1/ESPWatchS3
ESP32-S3 based smartwatch with CrystalFontz 240x240 1.3in LCD.
126 parts2
Questions
How big is the 26th PCB PitchSender PCB?
It measures 148.2 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 26th PCB PitchSender use?
26 parts, built around the BMP390, BNO055 and S03B-PASK-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 26th PCB PitchSender KiCad files?
From the torica-org/26th_PCB_Fuselage repository on GitHub, at the commit this page was made from: the board is 26th_PCB_PitchSender.kicad_pcb and its schematic 26th_PCB_PitchSender.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 26th PCB PitchSender design in my own project?
Its repository states no licence, so its author keeps all rights: ask torica-org before reusing the design.