Skip to the content
2 layers24 × 41 mmRegulador 5V, the printed circuit board in 3D

Repositório destinado a guardar meus projetos feitos no kicad

Size
24 × 41 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
5
Pads
24
Tracks, vias
37, 40
Pours
5
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Apr 2026
Updated
20 Apr 2026

Overview

Regulador 5V is an open-source printed circuit board by toninxl, from the toninxl/kicad-projects repository on GitHub. It is a 2-layer board of 24 × 41 mm with 11 parts on 5 nets, routed with 37 tracks and 40 vias.

It is built around the AMS1117-5.0 and MRA4007T3G-FS. Its parts include 5 capacitors, 2 diodes, 2 connectors, 1 resistor and 1 IC.

Main components

2

Parts

11
QtyValueFootprintReferences
2100nCapacitor_SMD:C_0805_2012MetricC1, C5
1100uF 50VCapacitor_SMD:C_0805_2012MetricC2
1100uF 6.3VCapacitor_SMD:C_1206_3216MetricC4
110uF 50VCapacitor_SMD:C_0805_2012MetricC3
11KResistor_SMD:R_0805_2012MetricR1
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1LEDLED_SMD:LED_0805_2012MetricD2
1MRA4007T3GDiode_SMD:D_SMAD1
1VinTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1
1VoutTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ2

More from toninxl/kicad-projects

2
  • 2 layers28 × 62 mmModulo rele, the printed circuit board in 3D

    Modulo rele

    toninxl/kicad-projects

    Repositório destinado a guardar meus projetos feitos no kicad

    9 parts
  • 2 layers27.5 × 56.5 mmModulo rele, the printed circuit board in 3D

    Modulo rele

    toninxl/kicad-projects

    Repositório destinado a guardar meus projetos feitos no kicad

    9 parts

Similar boards

  • 4 layers102 × 104.8 mmHw lower v2, the printed circuit board in 3D

    Hw lower v2

    oresk/multi_new

    137 parts
  • 2 layers100 × 100 mmBQ76pl455a, the printed circuit board in 3D

    BQ76pl455a

    g-rahul/BQ76PL455A-EVM-Clone

    This respository contains low cost design files for BQ76PL455A-EVM Clone.

    255 parts5
  • 2 layers89.7 × 53.5 mmArdui89 Cinque Uno, the printed circuit board in 3D

    Ardui89 Cinque Uno

    Cyrillinux/Ardui89

    Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

    57 parts2
  • 2 layers51 × 70 mmAuto dimmer, the printed circuit board in 3D

    Auto dimmer

    ilyushkin/auto_dimmer

    Automatic dimmer for IKEA NYMANE (103.569.62) lamp based on AVR ATtiny13A MCU.

    56 parts2GPL-3.0
  • 2 layers100 × 100 mmKicad LFO 1 2, the printed circuit board in 3D

    Kicad LFO 1 2

    promesoft/KicadJE_LFO_1

    Initial Analogue LFO - Mult/Mix - NAND/AND/NOT - FlipFlop - 555LFO

    147 parts2MIT
  • 2 layers99.5 × 74 mmDimmer pcb, the printed circuit board in 3D

    Dimmer pcb

    Bonusbartus/ac_pwm_led_dimmer

    A PCB for dimming AC LED lamps

    35 parts
  • 4 layers68.9 × 50.7 mmDigitalClock ATMega328, the printed circuit board in 3D

    DigitalClock ATMega328

    bostang/PCBs

    My repository for documenting all PCB Projects I have done

    74 parts
  • 4 layers102.2 × 83 mmZorionx nivara, the printed circuit board in 3D

    Zorionx nivara

    BRYANSFM/Bryan_Fernandez_ELECTIVA_2025_C2

    132 parts

Questions

How big is the Regulador 5V PCB?

It measures 24 × 41 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Regulador 5V use?

11 parts, built around the AMS1117-5.0 and MRA4007T3G-FS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Regulador 5V KiCad files?

From the toninxl/kicad-projects repository on GitHub, at the commit this page was made from: the board is Regulador 5V/Regulador 5V.kicad_pcb and its schematic Fonte ajustavel/Fonte ajustavel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Regulador 5V design in my own project?

Its repository states no licence, so its author keeps all rights: ask toninxl before reusing the design.