4 layers30.4 × 45.9 mm
4 layers30.4 × 43.9 mm
Ds1486
tomverbeure/ds1486ds1486
- Size
- 30.4 × 43.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 86
- Pads
- 315
- Tracks, vias
- 978, 122
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 May 2025
- Updated
- 17 Sep 2025
Overview
Ds1486 is an open-source printed circuit board by tomverbeure, from the tomverbeure/ds1486 repository on GitHub. It is a 4-layer board of 30.4 × 43.9 mm with 76 parts on 86 nets, routed with 978 tracks and 122 vias.
It is built around the RP2040, W25Q16JVUXIQ and SN74LVC1G00DRL, with the AP2112K-3.3, SN74LVC8T245PW and YSN8010SJ among its other parts. Its parts include 40 resistors, 20 capacitors, 7 ICs, 5 connectors and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
SN74LVC1G00DRL
SOT-5X3-5-40℃~+125℃ 1 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 1.7V~2V 10uA 2 3.8ns@3.3V,15pF 300mV、400mV、450mV、550mV 32mA 32mA 700mV~800mV 74LVC Series NAND Gate SOT-5X3-5 Logic Gates ROHSTexas InstrumentsLogic Gates
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
SN74LVC8T245PW
TSSOP-24-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
YSN8010SJ
SOP-8-40℃~+85℃ 1.6V~5.5V 1uA 1uA Built-in I2C No SOP-8 Real Time Clocks ROHSYXCReal Time Clocks
E3SB12E00004EE
SMD3225-4P-40℃~+120℃ 100Ω 12MHz 12pF ±35ppm ±8ppm SMD3225-4P Crystals ROHSHosonic ElecCrystals
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R39 +2 |
| 17 | 1.96k | Resistor_SMD:R_0402_1005Metric | R3, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34 +1 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C13, C14, C15, C16, C17, C20 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C11, C12 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R36, R40 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R37, R38 |
| 2 | BZT52C6V8-7-F | Diode_SMD:D_SOD-123F | D1, D2 |
| 2 | SN74LVC1G00DRL | Package_TO_SOT_SMD:Texas_R-PDSO-N5_DRL-5 | U5, U7 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | CR1225 H2 | Kicad_Personal:CR1225_H2 | BT1 |
| 1 | DBG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | DBG1-16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | DBG17-32 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | DS1-16 | Kicad_Personal:PinHeader_1x16_P2.54mm_Vertical_DIP_Diameter_Flipside | J4 |
| 1 | DS17-32 | Kicad_Personal:PinHeader_1x16_P2.54mm_Vertical_DIP_Diameter_Flipside | J5 |
| 1 | E3SB12E00004EE | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SN74LVC8T245 | Package_SO:SSOP-24_3.9x8.7mm_P0.635mm | U4 |
| 1 | W25Q16JVUXIQ | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | YSN8010SJ | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U6 |
More from tomverbeure/ds1486
1Similar boards
- 4 layers52.7 × 42.5 mm
OmniProbe
emertcakir/OmniProbe
Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040
77 parts4MIT - 2 layers248.9 × 120.7 mm
16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76 - 2 layers39.4 × 20.3 mm
- 2 layers130 × 51 mm
OSUMGP RP2040
NickGuyver/OSUMGP-RP2040
KiCanvas link so you don't have to download to just review the files is here
92 parts18CC-BY-4.0 - 2 layers40 × 18 mm
- 2 layers34 × 107.5 mm
- 4 layers44.5 × 40.6 mm
- 4 layers29.5 × 23.4 mm
Stamp RP2040
TheContrappostoShop/PICOre
The PICOre project consist of an ecosystem with stamp module all pin to pin compatible.
44 parts1
Questions
How big is the Ds1486 PCB?
It measures 30.4 × 43.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ds1486 use?
76 parts, built around the RP2040, W25Q16JVUXIQ, SN74LVC1G00DRL and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ds1486 KiCad files?
From the tomverbeure/ds1486 repository on GitHub, at the commit this page was made from: the board is ds1486/ds1486.kicad_pcb and its schematic ds1486/ds1486.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ds1486 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tomverbeure before reusing the design.