Skip to the content
2 layers59.4 × 54.6 mmSTM LORA, the printed circuit board in 3D

STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

Size
59.4 × 54.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
68
Pads
174
Tracks, vias
160, 53
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 Mar 2017
Updated
30 Mar 2025

Overview

STM LORA is an open-source printed circuit board by tomtor, from the tomtor/STM32-RFM95-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 59.4 × 54.6 mm with 37 parts on 68 nets, routed with 160 tracks and 53 vias.

It is built around the BAT85. Its parts include 16 connectors, 2 capacitors, 2 resistors, 2 ICs and 1 diode. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

1

README

README.md

AVR128DB28

AVR Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip.

See:

for background and old software samples.

This repository now has tested LMIC (https://github.com/tomtor/STM32-RFM95-PCB/tree/master/AVR128DBLora) and RadioLib (https://github.com/tomtor/STM32-RFM95-PCB/tree/master/AVR128_RadioLib) Arduino code for the AVR128DB board with the RFM95W.

3D rendering

Schema: https://github.com/tomtor/STM32-RFM95-PCB/raw/master/AVR-LORA.pdf

Note that most components are optional:

  • A LED to flash
  • I2C 4K7 pull up resistors
  • A lot of capacitors (mounting a single 1uF will do in most situations)
  • 32.768kHz crystal
  • 24MHz crystal
  • MCP1700 regulator with 1uA idle current
  • Schottky diode for charging NiMH batteries from a solar panel
  • Voltage divider for measuring battery voltage

Aisler link for producing 1206 board: https://aisler.net/p/EAZHDDHF

Aisler link for producing 0805 board: https://aisler.net/p/ZRKAROVP

STM32-RFM95-PCB

STM32 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

3D rendering

See:

You can order this board here:

https://aisler.net/p/CZGCIFFH

Credits:

https://github.com/myelin/myelin-kicad-libraries (STM32 module KiCad library)

https://github.com/mysensors-kicad/mysensors_symbols (RFM95 KiCad library)

https://github.com/novirium/ESPilot/blob/master/lib/ESPilot.pretty/RFM95.kicad_mod (RFM95 KiCad footprint)

Parts

37
QtyValueFootprintReferences
3CONN_01X02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ12, J13, J14
3CONN_01X03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4, J5, J15
2100kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR1, R2
2CONN_01X01Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ6, J16
2CONN_01X05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ8, J9
1100nCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC2
1100µCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
1BAT85Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUpD1
1BattConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1CONN_01X14Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ7
1CONN_01X17Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_VerticalJ3
1CONN_02X07Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalJ10
1CONN_02X09Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_VerticalJ11
1RFM95HWRFM:RFM95U2
1SolarConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1stm32f103c8t6-module-chinaSTM32China:stm32f103c8t6-module-chinaU1

The 23 most common of 37 parts.

More from tomtor/STM32-RFM95-PCB

2
  • 2 layers51.7 × 29.2 mmAVR LORA-805, the printed circuit board in 3D

    AVR LORA-805

    tomtor/STM32-RFM95-PCB

    STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

    39 parts20GPL-3.0
  • 2 layers51.7 × 29.2 mmAVR LORA, the printed circuit board in 3D

    AVR LORA

    tomtor/STM32-RFM95-PCB

    STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

    39 parts20GPL-3.0

Similar boards

  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers66 × 99 mmNucleo32TNC, the printed circuit board in 3D

    Nucleo32TNC

    mobilinkd/NucleoTNC

    The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

    54 parts110GPL-3.0
  • 2 layers28.6 × 36.8 mmZXROM-4in1, the printed circuit board in 3D

    ZXROM-4in1

    pmandes/zx-spectrum-issue6a-replica

    ZX Spectrum 48k Issue 6A board replica

    9 parts52
  • 2 layers140 × 85 mmSizif128, the printed circuit board in 3D

    Sizif128

    UzixLS/zx-sizif-128

    Easy-to-build minimalistic ZX Spectrum clone

    112 parts34MIT
  • 2 layers20 × 110 mmNode main, the printed circuit board in 3D

    Node main

    attoparsec/Node

    KiCAD project and Arduino code for the Node module

    47 parts19
  • 2 layers335 × 250 mmACE Board, the printed circuit board in 3D

    ACE Board

    acwright/6502-ACE

    6502-ACE 8-Bit Retro Computer Project

    205 parts12CERN-OHL-P-2.0
  • 2 layers36.4 × 31.8 mmMB9X UART, the printed circuit board in 3D

    MB9X UART

    famicomical/MB9X-UART

    In-system Serial Programming Adapter for Fujitsu F2MC-16LX microcontrollers

    15 parts6

Questions

How big is the STM LORA PCB?

It measures 59.4 × 54.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STM LORA use?

37 parts, built around the BAT85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM LORA KiCad files?

From the tomtor/STM32-RFM95-PCB repository on GitHub, at the commit this page was made from: the board is STM-LORA.kicad_pcb and its schematic AVR-LORA-805.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM LORA design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).