2 layers
2 layers41.9 × 12.7 mm
140bpf
tomswartz07/CPOSC2019Files and materials related to CPOSC 2019 presentation
- Size
- 41.9 × 12.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 18
- Tracks, vias
- 32, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Aug 2019
- Updated
- 25 Sep 2019
Overview
140bpf is an open-source printed circuit board by tomswartz07, from the tomswartz07/CPOSC2019 repository on GitHub. It is a 2-layer board of 41.9 × 12.7 mm with 3 parts on 3 nets, routed with 32 tracks and 12 vias.
It is built around the RBP-140+. Its parts include 2 connectors and 1 IC.
Main components
1README
rbp140-kicad/README.md140 MHz Band-Pass Filter KiCAD PCB Files
This repository contains the files associated with the creation of a Band-Pass Filter ideal for NOAA APT Satellite and UHF Amateur Radio reception.
Bill of Materials
- SMA PCB Mount connectors, available from various online sellers
- Specific to this project, SMA Female Jack Right Angle PCB Mount RF Connectors were used
- 140-BPF+ chip from MiniCircuits
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_Coaxial | Connectors:SMA_THT_Jack_Straight | J1, J2 |
| 1 | RBP-140+ | 140bpf:RBP-140+ | U1 |
Questions
How big is the 140bpf PCB?
It measures 41.9 × 12.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 140bpf use?
3 parts, built around the RBP-140+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 140bpf KiCad files?
From the tomswartz07/CPOSC2019 repository on GitHub, at the commit this page was made from: the board is rbp140-kicad/140bpf.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 140bpf design in my own project?
Its repository states no licence, so its author keeps all rights: ask tomswartz07 before reusing the design.
Similar boards
- 2 layers20 × 24 mm
RBP-140+
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
7 parts15 - 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
