2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers50 × 50 mm
M5 Moter
tomorrow56/M5Stack_Motor_Driver4- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 34
- Pads
- 181
- Tracks, vias
- 278, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2018
- Updated
- 29 May 2019
Overview
M5 Moter is an open-source printed circuit board by tomorrow56, from the tomorrow56/M5Stack_Motor_Driver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 50 mm with 27 parts on 34 nets, routed with 278 tracks and 61 vias.
It is built around the L293D. Its parts include 3 capacitors, 3 resistors, 3 diodes, 2 connectors and 1 IC.
Main components
1README
README.mdM5Stack_Motor_Driver
Motor Driver: L293D (Texas Instruments)
- datasheet: http://www.ti.com/lit/ds/symlink/l293.pdf
Support page
https://thousandiy.wordpress.com/2018/10/20/motor-driver-shield-for-m5stack/
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3 | MK1, MK2, MK3, MK4 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_2.2mm_M2 | MK5, MK6, MK7, MK8 |
| 4 | Terminal_01X02_FEMALE | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | ExtVCC1, MOTOR-L1, MOTOR-R1, VCC_SEL1 |
| 3 | 1N4148 | Diodes_SMD:D_SOD-323 | D1, D2, D3 |
| 2 | 10k | Resistors_SMD:R_0603 | R2, R3 |
| 2 | 10uF | Capacitors_SMD:C_0603 | C1, C2 |
| 1 | 0 | Resistors_SMD:R_0603 | R1 |
| 1 | 100uF | Capacitors_SMD:C_1206 | C3 |
| 1 | Battery | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | J3 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm_LongPads | IC1 |
| 1 | M-BUS | footprint:Pin_Header_MBUS_SMD_TH | J1 |
| 1 | OPEN_HARDWARE_1 | footprint:OSHW-logo_silkscreen-front_3mm | LOGO1 |
| 1 | SK-12D01-VG4 | footprint:slide_switch_angled | SW1 |
| 1 | TDIY_LOGO | footprint:TDIY-LOGO-S | LOGO_TDIY1 |
Questions
How big is the M5 Moter PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the M5 Moter use?
27 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the M5 Moter KiCad files?
From the tomorrow56/M5Stack_Motor_Driver repository on GitHub, at the commit this page was made from: the board is KiCad/M5_Moter_v03/M5_Moter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the M5 Moter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
