Tommy270502/PM4HW template is an open-source printed circuit board by Tommy270502, from the Tommy270502/PM4 repository on GitHub. It is a 4-layer board of 63.5 × 118.1 mm with 88 parts on 107 nets, routed with 423 tracks and 200 vias.
It is built around the AD8232ACPZ-R7. Its parts include 36 resistors, 30 capacitors, 5 ICs, 3 connectors and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R7, R10, R12, R14, R15, R16, R36 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C8, C16, C18, C19, C28, C30 |
| 7 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R9, R11, R23, R24, R29 |
| 7 | ~ | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | 10M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R30, R31, R33, R34 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C7, C9, C14, C15, C17 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R8, R19, R28 |
| 4 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C10, C12 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R13, R17, R18 |
| 4 | 4n7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C11, C13 |
| 3 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21, C23 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C22 |
| 2 | 180k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26 |
| 2 | 330n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C29 |
| 2 | Conn_01x32_Female | Connector_PinSocket_2.54mm:PinSocket_1x32_P2.54mm_Vertical | P1, P2 |
| 2 | LEDred | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | 1M4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 1n5 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 360k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | AD8232ACPZ-R7 | AD8232:LFCSP_20 | U5 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | OpenLog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | Y2 |
| 1 | Radar K-LC5-RFB-00C | HW_template:Radar_K-LC5 | Y1 |
It measures 63.5 × 118.1 mm and has 4 copper layers, 1.6 mm thick.
88 parts, built around the AD8232ACPZ-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tommy270502/PM4 repository on GitHub, at the commit this page was made from: the board is 3_Hardware/1_HW_template_2026_02_11_v10/HW_template.kicad_pcb and its schematic 3_Hardware/1_HW_template_2026_02_11_v10/ECG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Tommy270502 before reusing the design.
Swapnil007-Curious/NeuroVox-v2.0
NeuroVox v2.0 is a conformal 220×50mm forearm wearable PCB. Powered by an ESP32-S3, it captures high-res 4-channel EMG via AD8232, INA333, and ADS1299 ICs using leadless, integrated dry Ag/AgCl edge electrodes.
nwasr/Stamp-Board-of-AD8232
Compact AD8232 stamp board designed in KiCad v9 with schematic, PCB layout, Gerbers, BOM, and 3D view.
sensors-inl/Nervous-ECG
ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.
konstantinosfragkoulis/HealthMonitor
Chest-worn STM32U5 sensor that records ECG and SCG, and computes HRV on-device. Bare metal C.
nwasr/SparkFun-AD8232-Replica
KiCad v9 PCB design replicating the SparkFun AD8232 ECG module
abbyfinka/FYP-Knitted-EMG
This repository contains the software and hardware design files developed for my Final Year Project at Imperial College London
AlexMirt2/EKG-signal-acquisition-and-processing-system
The diploma project focuses on designing and implementing an ECG signal acquisition and processing system. It includes smart devices capable of transmitting data to the cloud.
