Skip to the content
2 layersBoelgene v1, the printed circuit board in 3D

Bølgene is a digital instrument inspired by the Ondes Martenot, a contemporary instrument to the Theremin. The original instrument features a force sensitive button for the expression/volume and continuous pitch…

Copper layers
2
Thickness
1.6 mm
Parts
76
Nets
65
Pads
213
Tracks, vias
326, 2
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Sep 2024
Updated
24 Oct 2025

Overview

Boelgene v1 is an open-source printed circuit board by tomcombriat, from the tomcombriat/TES_Boelgene repository on GitHub. It is a 2-layer board with 76 parts on 65 nets, routed with 326 tracks and 2 vias.

It is built around the MCP3008-I/P. Its parts include 12 capacitors, 5 connectors, 3 ICs and 2 resistors. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

TES - Bølgene

Bølgene is a digital instrument inspired by the Ondes Martenot, a contemporary instrument to the Theremin. The original instrument features a force sensitive button for the expression/volume and continuous pitch controlled by the position of a ring.

Bølgene is a small, table-top, digital, instrument having the base features. The main differences is that it features polyphony, with several pressure sensitive buttons.

Bølgene (first version) was created in a few weeks specially for Oslo Skaper Festival 2024.

v1

Hardware

Nothing special here except a well sized plank, found in the street. Apart from that…

  • CPU: RP2040
  • additionnal ADC: MCP3008
  • DAC: PT8211
  • expressions buttons: 4
  • synthesis potentiometers:

Made on single sided PCB.

Software

boelgene_1

The version presented at Oslo Skaper Festival, monophonic with Delay Feedback creating weird sounds, especially in the bass register.

boelgene_poly

Version supporting 4 expression buttons, currently tuned to the fifth and the two thirds. Uses the same synthesis algorithm than boelgene_v1

Parts

76
QtyValueFootprintReferences
6ADC_refTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP2, TP3, TP4, TP9, TP10, TP11
6GNDTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP1, TP5, TP6, TP7, TP8, TP12
6GNDATestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP21, TP22, TP23, TP24, TP25, TP26
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
210Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2100nCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC3, C5
2100uCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC2, C4
21u dac1Capacitor_THT:CP_Radial_D5.0mm_P2.50mmC9, C11
21u dac2Capacitor_THT:CP_Radial_D5.0mm_P2.50mmC10, C12
21u pwmCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC7, C8
10.1uCapacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_HorizontalC1
11uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC6
120k_adj1Potentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV3
120k_adj2Potentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV2
120k_adj3Potentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV1
120k_adj4Potentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV4
13.3VTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP42
1AI26TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP29
1AI27TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP28
1AI28TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP27
1D2TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP13
1D3TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP14
1D4TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP15
1D5TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP16
1D6TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP17
1D7TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP18
1D8TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP19
1D9TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP20
1LOGOPCB_symbols:owl_7x10G***
1MCP3008Package_DIP:DIP-16_W7.62mmU2
1PT8211-pt8211Package_SO:SOP-8_3.9x4.9mm_P1.27mmU3
1PicoPico:RPi_Pico_SMD_THU1
1adc0TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP39
1adc1TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP38
1adc2TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP37
1adc3TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP36
1adc4TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP35
1adc5TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP34
1adc6TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP33
1adc7TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP32
1battConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ1
1out_PWMTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP43
1out_dac1TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP44
1out_dac2TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP45
1pressure1Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1pressure1_outTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP40
1pressure2Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ3
1pressure2_outTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP31
1pressure3Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1pressure3_outTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP30
1pressure4Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
1pressure4_outTestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mmTP41

More from tomcombriat/TES_Boelgene

1
  • 2 layers86.4 × 53.8 mmBoelgene v1d1, the printed circuit board in 3D

    Boelgene v1d1

    tomcombriat/TES_Boelgene

    Bølgene is a digital instrument inspired by the Ondes Martenot, a contemporary instrument to the Theremin. The original instrument features a force sensitive button for the expression/volume and continuous pitch…

    54 parts

Similar boards

  • 2 layers380 × 148.5 mmKeyboard, the printed circuit board in 3D

    Keyboard

    InkboxSoftware/all-screen-keyboard

    The first open source all-screen keyboard

    500 parts241MIT
  • 2 layers100 × 100 mmRecurBOY, the printed circuit board in 3D

    RecurBOY

    cyberboy666/recurBOY

    a rpi0 video-instrument – created in collaboration with Guergana Tzatchkova

    35 parts122GPL-3.0
  • 4 layers43.2 × 43.2 mmPogobot head, the printed circuit board in 3D

    Pogobot head

    nekonaute/pogobot

    Pogobot is an open-source open-hardware robotic platform for swarm robotics

    140 parts21
  • 2 layers100 × 100 mmI n c u r, the printed circuit board in 3D

    I n c u r

    cyberboy666/i_n_c_u_r

    a r_e_c_u_r video sampler extension circuit - adding knobs, cv and serial midi control

    38 parts16GPL-3.0
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers111.4 × 40.9 mmRainworks Electrical, the printed circuit board in 3D

    Rainworks Electrical

    IceyPlazza/EWB-EPA-Rainworks

    26-27 EWB EPA Rainworks project; We're putting a sensor box in the ground!

    29 parts7
  • 2 layers150 × 69 mmProgramming jig r1.0, the printed circuit board in 3D

    Programming jig r1.0

    butterstick-fpga/programming-jig

    A FT232H based production programming jig for the ButterStick

    50 parts6
  • 2 layers56 × 65 mmDataHat, the printed circuit board in 3D

    DataHat

    challengerjdb/RaspberryPiHat-datalogger

    My name is Jacob Bendell, and I’m a student at the University of Pennsylvania studying Electrical Engineering. I took this past year off from school to avoid online classes and intern at Amped Innovation, a start-up in…

    22 parts6

Questions

What parts does the Boelgene v1 use?

76 parts, built around the MCP3008-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Boelgene v1 KiCad files?

From the tomcombriat/TES_Boelgene repository on GitHub, at the commit this page was made from: the board is hardware/Boelgene_v1/Boelgene_v1.kicad_pcb and its schematic hardware/Boelgene_v1/Boelgene_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Boelgene v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask tomcombriat before reusing the design.