

IDE controller
- Size
- 168.1 × 94.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 279
- Pads
- 641
- Tracks, vias
- 2,443, 215
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jun 2025
- Updated
- 3 Aug 2025
Overview
IDE controller is an open-source printed circuit board by TomasPavlovicPavlo, from the TomasPavlovicPavlo/286_schematic repository on GitHub. It is a 2-layer board of 168.1 × 94.4 mm with 73 parts on 279 nets, routed with 2,443 tracks and 215 vias.
It is built around the 74LS245SC, 74LS125DC and SN75189D, with the 74HC00D among its other parts. Its parts include 20 resistors, 17 capacitors, 13 ICs, 5 connectors and 1 diode.
Main components
474LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN75189D
SOIC-140℃~+70℃ 4 4.5V~5.5V Receiver SOIC-14 RS232 ICs ROHSTexas InstrumentsRS232 ICs74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
README
README.mdReverse engineering of 286 motherboard
This is the repository vhere I am working on reverse engineering of one 286 motherboard. It is still in progress. I use KiCad. In the PCB editor I insert fotos as background image and draw all tracks. Then I transfer all to schematic and analyse connections.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 4k6 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R5, R7, R8, R9, R11, R12, R13, R14, R15, R16, R17, R20 |
| 14 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP6-1, JP6-2, JP6-3, JP6-4, JP6-5, JP6-6, JP6-7, JP6-8, JP7, JP8, JP9-2, JP9-3, JP9-4, JP9-5 |
| 12 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C8, C10, C11, C12, C13, C14 |
| 4 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R6, R10, R19 |
| 3 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U12, U13, U14 |
| 3 | SN75189 | Package_DIP:DIP-14_W7.62mm | U1, U7, U9 |
| 2 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R18 |
| 2 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C17, C19 |
| 2 | 47p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C15, C16 |
| 2 | 74HC00 | Package_DIP:DIP-14_W7.62mm | U6, U8 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10, JP1 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JP2, JP3 |
| 2 | W86C450 | Package_DIP:DIP-40_W15.24mm_Socket | U4, U5 |
| 1 | 470p | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C18 |
| 1 | 74LS125 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Bus_ISA_16bit_narrow | Connector_PCBEdge:BUS_AT | J1 |
| 1 | C820101A | _mine:LQFP-48_10x10mm_P0.7mm | U11 |
| 1 | Conn_02x17_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | CON2 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | JP5 |
| 1 | D_Small | Diode_THT:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | GAMEPORT | Connector_Dsub:DSUB-15_Socket_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm | J2 |
| 1 | UM82C11 | Package_DIP:DIP-40_W15.24mm | U3 |
More from TomasPavlovicPavlo/286_schematic
1- 4 layers231.9 × 218.7 mm

Similar boards
- 2 layers165.1 × 66 mm

Selector8x16
DavidMFlynn/VideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
113 parts1GPL-3.0 - 2 layers231.1 × 106.7 mm

- 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 4 layers203.2 × 105.4 mm

- 2 layers157.5 × 73.9 mm

- 2 layers

CompaqportableIII
raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
123 parts17 - 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers190.5 × 77 mm

Questions
How big is the IDE controller PCB?
It measures 168.1 × 94.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IDE controller use?
73 parts, built around the 74LS245SC, 74LS125DC, SN75189D and 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IDE controller KiCad files?
From the TomasPavlovicPavlo/286_schematic repository on GitHub, at the commit this page was made from: the board is IDE_controller/IDE_controller/IDE_controller.kicad_pcb and its schematic IDE_controller/IDE_controller/IDE_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IDE controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask TomasPavlovicPavlo before reusing the design.