
Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

A simple NTC temperature sensor
Matter esp32-temperature sensor is an open-source printed circuit board by tomasmcguinness, from the tomasmcguinness/matter-esp32-temperature-sensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 32.7 × 35.7 mm with 23 parts on 38 nets, routed with 225 tracks and 26 vias.
It is built around the ESP32-H2-MINI-1U. Its parts include 8 resistors, 5 capacitors, 3 diodes, 3 connectors and 2 ICs. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
A simple Matter enabled NTC temperature sensor for ESP32
[!CAUTION] The PCB design has some issues that need to be resolved.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R6 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R7, R8 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 2 | 1µF | Capacitor_SMD:C_0805_2012Metric | C3, C7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TS-1088-xR025 | SW1, SW2 |
| 1 | 0.1µ | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10µ | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1µ | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x8_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | ESP32-H2-MINI-1 | PCM_Espressif:ESP32-H2-MINI-1 | U1 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

StuckAtPrototype/PCB_business_card_remake
A custom PCB based "business" card that lets you play a version of Flappy Bird.



antoine-prrn/mia-ou
A smart, connected device designed to be attached to pet collars. It monitors various animal metrics and enables interaction via a mobile app. Built for safety, health, and user engagement.

Andreasdahlberg/zkmeter
ZK-meter is a Zigbee HAN-module for Kamstrup Omnipower electricity meters.
It measures 32.7 × 35.7 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the ESP32-H2-MINI-1U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tomasmcguinness/matter-esp32-temperature-sensor repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/PCB.kicad_pcb and its schematic Hardware/PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).