Skip to the content
2 layers114.3 × 99.1 mmECB, the printed circuit board in 3D

An open-source controller for animal research Report Bug · Request Feature

Size
114.3 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
71
Pads
201
Tracks, vias
369, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
4 Jan 2023
Updated
18 Jul 2024

Overview

ECB is an open-source printed circuit board by tne-lab, from the tne-lab/OSCAR repository on GitHub, published under the MIT licence. It is a 2-layer board of 114.3 × 99.1 mm with 43 parts on 71 nets, routed with 369 tracks and 0 vias.

Its parts include 2 resistors, 1 capacitor and 1 connector.

README

README.md

OSCAR

An open-source controller for animal research
Report Bug · Request Feature

About the Project

OSCAR is an open-source controller for animal research that enables flexible control of a variety of industry standard hardware with platform-independent software. OSCAR offers millisecond latency with a flexible array of inputs and outputs at a fraction of the cost of commercial options. These features position OSCAR as a valuable option for improving consistency of behavioral experiments across studies.

Check out the paper on bioRxiv. Cite:

text
@article {Dastin-van Rijn2023.02.03.527033, author = {Evan M. Dastin-van Rijn and Elizabeth Sachse and Francesca Iacobucci and Megan Mensinger and Alik S. Widge}, title = {OSCAR: an open-source controller for animal research}, elocation-id = {2023.02.03.527033}, year = {2023}, doi = {10.1101/2023.02.03.527033}, publisher = {Cold Spring Harbor Laboratory}, abstract = {Operant animal behavior training and monitoring is fundamental to scientific inquiry across fields necessitating evaluation via controlled laboratory tasks. However, current commercial and open-source systems enforce particular hardware and software, limiting reproducibility and technique and data sharing across sites. To address this issue, we developed OSCAR: an open-source controller for animal research that enables flexible control of a variety of industry standard hardware with platform-independent software. OSCAR offers millisecond latency with a flexible array of inputs and outputs at a fraction of the cost of commercial options. These features position OSCAR as a valuable option for improving consistency of behavioral experiments across studies.Competing Interest StatementThe authors have declared no competing interest.}, URL = {https://www.biorxiv.org/content/early/2023/02/04/2023.02.03.527033}, eprint = {https://www.biorxiv.org/content/early/2023/02/04/2023.02.03.527033.full.pdf}, journal = {bioRxiv}}

Setup Instructions

  1. Order PCBs and parts. We've had success with PCB printing and assembly through JLCPCB and ordering the remaining through-hole components via Digikey.
  2. Order PCBs and parts for the ECB corresponding to your system. Currently, the only ECB available on this repository is for Coulbourn hardware.
  3. Solder all components to the boards.
  4. Upload the firmware to the Arduino. The firmware also requires the installation of the DAC8554 and digitalWriteFast libraries available through the library installer in the Arduino IDE. Ensure the board is set to the Mega 2560.
  5. Connect the OSCAR to the ECB by a 40 pin ribbon cable.
  6. Plug in the OSCAR to the 28 V supply. It is very important that this supply is POSITIVE 28 V otherwise the chips will fail.
  7. Turn on the power supply and then the OSCAR. If using the Coulbourn ECB, the LED corresponding to the OSCAR output (A or B) should illuminate.

Using OSCAR

To communicate with OSCAR's standard firmware over serial, we've provided a local server interface in oscar_server.py that can handle network commands from user software. This server can be started by running the file or by modifying the provided oscar.bat file. Alternatively, OSCAR has an integrated Source in the pybehave task development framework that should streamline control of the hardware as well as task development.

Troubleshooting

If you encounter problems, take a look at the issues section of the GitHub and leave a new one if your problem hasn't been previously addressed.

Parts

43
QtyValueFootprintReferences
20TestPoint_SmallTestPoint:TestPoint_Pad_2.5x2.5mmF, F, G, G, H, M, M, R, R, S, S, S, S, S, S, S +4
16RJ12Connector_RJ:RJ12_Amphenol_54601Constant1, Cue1, Cue2, Feeder1, Feeder2, HouseLight1, Probe1, Spare1, Spare2, Spare3, Spare4, Switch1, Switch2, Switch3, Switch4, Tone1
2LEDLED_THT:LED_D5.0mmA, B
2RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2
140_Pin_Ribbon_ConnectorTNEL:40 Pin Ribbon ConnectorJ1
1CCapacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mmC1
1SpeakerTNEL:CUI_RCJ-021Speaker1

More from tne-lab/OSCAR

1
  • 4 layers155.6 × 120 mmOSCAR, the printed circuit board in 3D

    OSCAR

    tne-lab/OSCAR

    An open-source controller for animal research Report Bug · Request Feature

    139 parts1MIT

Similar boards

  • 2 layers52.2 × 52.2 mmBase, the printed circuit board in 3D

    Base

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    43 parts3kApache-2.0
  • 2 layers33 × 34 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    43 parts608GPL-3.0
  • 2 layers42.9 × 19 mmPoly kb 2.25U, the printed circuit board in 3D

    Poly kb 2.25U

    thpoll83/PolyKybd

    PolyKybd

    43 parts411CERN-OHL-W-2.0
  • 2 layers99.1 × 99.7 mmRC6502 Prototyping, the printed circuit board in 3D

    RC6502 Prototyping

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    43 parts193GPL-3.0
  • 2 layers26.6 × 38.7 mmMdb slave esp32s3-mini, the printed circuit board in 3D

    Mdb slave esp32s3-mini

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    43 parts190MIT
  • 2 layers97.3 × 71 mmZynScreen v1, the printed circuit board in 3D

    ZynScreen v1

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    43 parts156

Questions

How big is the ECB PCB?

It measures 114.3 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ECB use?

43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ECB KiCad files?

From the tne-lab/OSCAR repository on GitHub, at the commit this page was made from: the board is PCB/ECB/Coulbourn/ECB.kicad_pcb and its schematic PCB/ECB/Coulbourn/ECB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ECB design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).