

Cozy extrude
- Size
- 41.9 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.57 mm
- Parts
- 11
- Nets
- 53
- Pads
- 78
- Tracks, vias
- 106, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 31 Dec 2022
- Updated
- 20 Feb 2024
Overview
Cozy extrude is an open-source printed circuit board by tmsmr, from the tmsmr/cozy-extrude repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.9 × 67.3 mm with 11 parts on 53 nets, routed with 106 tracks and 0 vias.
It is built around the ULN2003 and HF46F/5-HS1T. Its parts include 4 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.
Main components
2ULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor ArraysHF46F/5-HS1T
插件,7x20.5mm-40℃~+85℃ 1 Set Normally Open: 1A (SPST NO) 100mΩ 10ms 10ms 125Ω 200mW 30V@DC、277V@AC 4 5A 5A@30VDC、5A@250VAC 5V AgSnO2 Non-Polarized - Single Coil 插件,20.5x7mm Power Relays ROHSHFPower Relays
README
README.mdcozy-extrude
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | BME280 Conn | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | HF46F_5-HS1 | Hongfa-HF46F:HF46F | K1 |
| 1 | Heater-Switch | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | PWM Fan Conn | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J3 |
| 1 | RPi-Pico-Socket | RPi-Pico-Socket:RPi-Pico-Socket | J1 |
| 1 | ULN2003 | Package_DIP:DIP-16_W7.62mm | U1 |
The 7 most common of 11 parts.
Similar boards
- 4 layers99.6 × 76.2 mm

- 2 layers31 × 64 mm

Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm

ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm

- 2 layers134 × 91 mm

- 2 layers75 × 60 mm

DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers76 × 82.5 mm

Nucleo64 CNC
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
120 parts22
Questions
How big is the Cozy extrude PCB?
It measures 41.9 × 67.3 mm and has 2 copper layers, 1.57 mm thick.
What parts does the Cozy extrude use?
11 parts, built around the ULN2003 and HF46F/5-HS1T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cozy extrude KiCad files?
From the tmsmr/cozy-extrude repository on GitHub, at the commit this page was made from: the board is board/cozy-extrude.kicad_pcb and its schematic board/cozy-extrude.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cozy extrude design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).