

H10 Pi Pico
- Size
- 85 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 88
- Pads
- 229
- Tracks, vias
- 378, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Mar 2026
- Updated
- 29 Mar 2026
Overview
H10 Pi Pico is an open-source printed circuit board by tlsystems, from the tlsystems/H10-Paper-Tape-Reader-Punch repository on GitHub. It is a 4-layer board of 85 × 75 mm with 43 parts on 88 nets, routed with 378 tracks and 41 vias.
It is built around the MAX3232ID, BSS138 and BF545B. Its parts include 10 capacitors, 10 resistors, 6 ICs, 5 transistors and 5 connectors. It belongs with the RP2040 boards of this library.
Main components
3MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBF545B
SOT23-330V 6mA to 15mA, N-Channel Silicon Junction Field-Effect Transistors (FET)NXP SemiconductorsUncategorised
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 4 | MountingHole | .tls-footprints:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 74xx04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | 74xx165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | 74xx595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | BF545B | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DB-9_RS232_DTE | Connector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J3 |
| 1 | FTDI_USB | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | H10 ReaderPunch | .tls-footprints:PinHeader_2x13_P2.54mm_Horizontal | J1 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | RaspberryPi_Pico | .tls-footprints:RaspberryPi_Pico_Common_THT | U7 |
| 1 | Switch | .tls-footprints:SW_PB_Wurth_5x4mm | SW2 |
| 1 | USB Cable | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J5 |
| 1 | USB-C | .tls-footprints:USB-C_Breakout | J2 |
| 1 | ~ | .tls-footprints:5V Buck Converter | U5 |
More from tlsystems/H10-Paper-Tape-Reader-Punch
2- 4 layers54 × 35.2 mm

- 2 layers50.8 × 40.6 mm

Similar boards
- 2 layers50 × 42 mm

Elektor
joseluu/Elektor_sdr_teensy
Sdr hardware front end shield to be used on top of the teensy audio board
63 parts - 2 layers137.2 × 83.8 mm

PWA REV2
PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.
215 parts9AGPL-3.0 - 4 layers165 × 125 mm

- 4 layers68 × 99 mm

- 2 layers99.5 × 99.5 mm

ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT - 4 layers82.6 × 76.2 mm

- 2 layers85 × 56 mm

Aaronw2 raspberry pi spi programmer raspberry spi flash
oomlout/oomlout_oomp_project_bot_v_2
32 parts - 2 layers189.5 × 204.9 mm

SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0
Questions
How big is the H10 Pi Pico PCB?
It measures 85 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the H10 Pi Pico use?
43 parts, built around the MAX3232ID, BSS138 and BF545B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the H10 Pi Pico KiCad files?
From the tlsystems/H10-Paper-Tape-Reader-Punch repository on GitHub, at the commit this page was made from: the board is Kicad/H10 Pi Pico/H10 Pi Pico.kicad_pcb and its schematic Kicad/H10 Pi Pico/H10 Pi Pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the H10 Pi Pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask tlsystems before reusing the design.