2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0
2 layers52 × 78 mm
Wled V1
tlacassi/LED-PCB-V1Une vidéo qui explique le minimum nécessaire pour faire tourner l'ESP sur un pcb : https://www.youtube.com/watch?v=tQ0dL9M1wI&t=242s
- Size
- 52 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 64
- Pads
- 156
- Tracks, vias
- 220, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Oct 2023
- Updated
- 26 Oct 2023
Overview
Wled V1 is an open-source printed circuit board by tlacassi, from the tlacassi/LED-PCB-V1 repository on GitHub. It is a 2-layer board of 52 × 78 mm with 31 parts on 64 nets, routed with 220 tracks and 16 vias.
It is built around the ESP32-S3-WROOM-1-N8, 1N4148W_R1_00001 and AHQSH112LM1F00G, with the TS14-1212-140-BK-160-SCR-D among its other parts. Its parts include 13 capacitors, 2 resistors, 2 switches, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
1N4148W_R1_00001
SOD-123-55℃~+150℃ 1 Independent 1.25V@150mA 2.5uA@75V 200mA 410mW 4A 4ns 75V SOD-123 Switching Diodes ROHSPANJIT InternationalDiodes - General PurposeAHQSH112LM1F00G
插件-40℃~+105℃ 1 Set Normally Open: 1A (SPST NO) 10ms 12V 16A 24V@DC、277V@AC 5ms Silver Alloy 插件 Power Relays ROHSAmphenolPower RelaysTS14-1212-140-BK-160-SCR-D
插件-30℃~+80℃ 1.6N 12V 50mA PC Pin Round Button SPST-NO Through Hole 插件 Tactile Switches ROHSCUITactile Switches
README
README.mdLED-PCB-V1
Une vidéo qui explique le minimum nécessaire pour faire tourner l'ESP sur un pcb : https://www.youtube.com/watch?v=tQ0dL_9M1wI&t=242s
Le projet WLED pour le soft et les intégrations : https://kno.wled.ge
Datasheet WS2815b : https://www.marutsu.co.jp/contents/shop/marutsu/datasheet/WS2815B.pdf
Datasheet ESP32 : https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | SamacSys_Parts:CAPC1005X55N | C1, C3, C4, C9, C10, C11, C15, C0402C103K1RACAUTO1 |
| 3 | 1uF | SamacSys_Parts:CAPC1005X55N | C12, C13, C14 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 1000uF/50V | SamacSys_Parts:CAPAE1030X1050N | C5, C8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RN73H1JTTD1002F1, RN73H1JTTD1002F50 |
| 2 | Conn_01x04_Socket | SamacSys_Parts:39303041 | 39-30-3041, 39-30-3041-bis1 |
| 1 | 12v to 5v | SamacSys_Parts:TSR12450 | TSR-1-2450 |
| 1 | 1N4148W_R1_00001 | SamacSys_Parts:SOD3816X135N | D1 |
| 1 | 5v to 3v3 | SamacSys_Parts:AZ1117CR33TRG1 | AZ1117CR-3.3TRG1 |
| 1 | 694106301002 | SamacSys_Parts:694106301002_1 | J1 |
| 1 | AHQSH112LM1F00G | SamacSys_Parts:AHQSH112LM1F00G | K1 |
| 1 | BK1_HTC-100M | SamacSys_Parts:BK1HTC100M | F1 |
| 1 | ESP32-S3-WROOM-1 | SamacSys_Parts:ESP32S3WROOM1N8R8 | ESP32-S3-WROOM-1-N8 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1 |
| 1 | MMBT3904-7-F | SamacSys_Parts:SOT96P240X110-3N | Q1 |
| 1 | SN74AHCT125DR | SamacSys_Parts:SOIC127P600X175-14N | IC1 |
| 1 | TS14-1212-140-BK-160-SCR-D | SamacSys_Parts:TS0266160BK260LCRD | S1 |
| 1 | USB_C_Receptacle | SamacSys_Parts:2169900002 | 216990-0002 |
Questions
How big is the Wled V1 PCB?
It measures 52 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wled V1 use?
31 parts, built around the ESP32-S3-WROOM-1-N8, 1N4148W_R1_00001, AHQSH112LM1F00G and TS14-1212-140-BK-160-SCR-D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wled V1 KiCad files?
From the tlacassi/LED-PCB-V1 repository on GitHub, at the commit this page was made from: the board is HW/wled_V1/wled_V1.kicad_pcb and its schematic HW/wled_V1/wled_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wled V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tlacassi before reusing the design.
Similar boards
- 2 layers299 × 82.5 mm
PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 4 layers56.5 × 99.8 mm
BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers129.5 × 50.8 mm
- 4 layers84.5 × 129.5 mm
- 2 layers110 × 115 mm
Esp32 keyboard v0.1
hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1
230 parts168GPL-3.0 - 2 layers35.1 × 36.6 mm
BinNanoFOC
katbinaris/nanofoc_devkit
Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.
76 parts146 - 2 layers148 × 81 mm
Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT