
Choc v1 socket reversible 165 595
TL605267/my_split_keyboard
My first split keyboard design using CH582F MCU. Key position is based on sofle

My first split keyboard design using CH582F MCU. Key position is based on sofle
Kbd is an open-source printed circuit board by TL605267, from the TL605267/my_split_keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 146.1 × 106.6 mm with 76 parts on 92 nets, routed with 930 tracks and 152 vias.
It is built around the 74HC165D, SK6812MINI-E and BAV70. Its parts include 39 diodes, 26 switches, 3 ICs, 2 resistors and 2 connectors. It belongs with the keyboards and input boards of this library.
My first split keyboard design using CH582F MCU. Key position is based on sofle
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | SK6812MINI | keyswitches:LED_SK6812MINI_E_REVERSIBLE | LED00, LED01, LED02, LED03, LED04, LED05, LED10, LED11, LED12, LED13, LED14, LED15, LED20, LED21, LED22, LED23 +10 |
| 26 | SW_Push | keyswitches:SW_MX_1905_reversible | SW00, SW01, SW02, SW03, SW04, SW05, SW10, SW11, SW12, SW13, SW14, SW15, SW20, SW21, SW22, SW23 +10 |
| 13 | BAV70 | keyswitches:BAV70_SOT-23_Reversible | D0001, D0203, D0405, D1011, D1213, D1415, D2021, D2223, D2425, D3031, D3233, D3435, D3637 |
| 2 | 74HC165 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2, U4 |
| 2 | Conn_01x12_MountingPin | Connector_FFC-FPC:TE_1-84952-2_1x12-1MP_P1.0mm_Horizontal | J1, J2 |
| 2 | R_Pack08 | Resistor_SMD:R_Array_Convex_8x0602 | RN1, RN2 |
| 1 | 10kOhm | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 500Ohm | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | CH582 | Package_DIP:DIP-24_W15.24mm | U1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | JP1 |

TL605267/my_split_keyboard
My first split keyboard design using CH582F MCU. Key position is based on sofle

TL605267/my_split_keyboard
My first split keyboard design using CH582F MCU. Key position is based on sofle

roberto314/Unicomp3
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.

andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.


ScatteredDrifter/Cynosure-III
A 38-Key split-keyboard based on Xiao-rp2040 seeduino


cqa02303/hidloom
HIDloom programmable keyboard software and reproducible appliance image

FiredClay111/FC-KB-01-Mk.1
Do not use, first version of the keyboard uploaded for posterity. Use Mk.2 instead.

seancaulfield/ISOish87
h87 compatible keyboard PCB for my own preferred layout
It measures 146.1 × 106.6 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the 74HC165D, SK6812MINI-E and BAV70. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TL605267/my_split_keyboard repository on GitHub, at the commit this page was made from: the board is hardware/mx_thru_hole_reversible/kbd.kicad_pcb and its schematic hardware/choc_v1_socket_reversible/choc_v1_socket_reversible.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).