
Backbone
andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.

Do not use, first version of the keyboard uploaded for posterity. Use Mk.2 instead.
Keyboard is an open-source printed circuit board by FiredClay111, from the FiredClay111/FC-KB-01-Mk.1 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 326.1 × 147.7 mm with 345 parts on 222 nets, routed with 2,010 tracks and 0 vias.
It is built around the SK6812MINI-E, BAV70 and 1N4148WT. Its parts include 90 capacitors, 90 switches, 49 diodes, 3 connectors and 2 resistors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +74 |
| 90 | SK6812MINI | sk6812mini:MX_SK6812MINI-E_REV | ST1, ST2, ST10, ST11, ST12, ST13, ST14, ST15, ST16, ST17, ST18, ST19, ST20, ST21, ST22, ST23 +74 |
| 79 | SW_Push | MX_Solderable:MX-Solderable-1U | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +63 |
| 42 | BAV70 | Package_TO_SOT_SMD:SOT-23 | D1, D2, D10, D11, D12, D13, D14, D15, D17, D18, D19, D20, D21, D22, D23, D25 +26 |
| 5 | 1N4148WT | Diode_SMD:D_1206_3216Metric | D8, D16, D24, D32, D49 |
| 3 | SW_Push | MX_Solderable:MX-Solderable-1.25U | SW81, SW82, SW83 |
| 2 | 1N4148WT | Diode_SMD:D_SOD-123 | D40, D48 |
| 2 | 5.1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | SW_Push | MX_Solderable:MX-Solderable-1.75U | SW51, SW77 |
| 2 | SW_Push | MX_Solderable:MX-Solderable-1.5U | SW35, SW48 |
| 2 | SW_Push | MX_Solderable:MX-Solderable-2.25U | SW63, SW66 |
| 1 | Case RGB | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | Pico | EM_Extras:RPi_Pico_SMD_TH | U1 |
| 1 | SW_Push | MX_Solderable:MX-Solderable-6.25U-ReversedStabilizers | SW84 |
| 1 | SW_Push | MX_Solderable:MX-Solderable-2U | SW32 |
| 1 | USB port | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USB-C in | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
The 325 most common of 345 parts.

andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.


ScatteredDrifter/Cynosure-III
A 38-Key split-keyboard based on Xiao-rp2040 seeduino


cqa02303/hidloom
HIDloom programmable keyboard software and reproducible appliance image

seancaulfield/ISOish87
h87 compatible keyboard PCB for my own preferred layout

seancaulfield/ISOish88e
Evo80 compatible keyboard PCB for my own preferred layout

It measures 326.1 × 147.7 mm and has 4 copper layers, 1.6 mm thick.
345 parts, built around the SK6812MINI-E, BAV70 and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FiredClay111/FC-KB-01-Mk.1 repository on GitHub, at the commit this page was made from: the board is PCB/keyboard.kicad_pcb and its schematic PCB/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).