Skip to the content
2 layers95 × 100 mmSbc6502a1, the printed circuit board in 3D

Single Board Computer using W65C02

Size
95 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
43
Nets
117
Pads
352
Tracks, vias
1,368, 45
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Mar 2024
Updated
14 May 2024

Overview

Sbc6502a1 is an open-source printed circuit board by tkhshmsy, from the tkhshmsy/sbc6502a1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 100 mm with 43 parts on 117 nets, routed with 1,368 tracks and 45 vias.

It is built around the 74HC00D, 74HC04D and 74HC138, with the HM62256BLP-7 among its other parts. Its parts include 11 capacitors, 8 ICs, 4 resistors, 3 connectors and 2 switches. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

sbc6502a1

Single Board Computer with 65C02, clone of Apple I

photo

Features

  • Clone of Apple I.
  • Communicate with Host-PC via Serial.
  • 32KB user RAM is available.
  • ROM has 2 bank of each 8KB + 8KB.
    • it is enough for wozmon, Apple1-BASIC, OSI-BASIC and so on.
  • Power supply +5VDC from Type-C or via Arduino Nano.

PCB

Schematics and Layout

sch pcb

BOM

RefNameQtyDescriptionPackageLink
U1W65C02S1MPU 6502DIP40akizuki, mouser
U2W65C21S1PIA 6521DIP40mouser
U374HC041DIP14akizuki
U474HC001DIP14akizuki
U574HC1381DIP16akizuki
U6622561SRAM 32Kx8DIP28mouser AS6C62256-55PCN, uPD43256AC-12L-13P
U727C5121ROM 64Kx8DIP28W27C512-45(EEPROM), mouser AT27C512R-45PU(OTP-EPROM)
U8MCP23S171SPI/GPIODIP28/300milakizuki
A1Arduino Nano1PIA Communicatorakizuki, other clones
X11.0 MHz1Crystal OSCDIP8akizuki 1MHz
C10.01uF-0.1uF1
C2, C4, C5, C6, C7, C8, C9, C10, C110.1uF9
C3470uF1
D11N41481DO35
J12x20 Pin Header1Bus export
J2USB Type-C Power1Power Supplyakizuki
J31x6 Pin Header1for Serial comm
JP1, JP21x2 Pin Header1jumper select
R1, R2, R3, R410K-100K4for pullup
RN110Kx81for pullup
SW1Push Button1Reset SW
SW2Slide Switch1Power SWakizuki
TP1,TP2Test Pin2

Note: Clock Frequency

  • Original Apple1 works at 1.0 MHz
  • This PCB works fine at 1.0 - 10.0 MHz
    • These clocks have been TESTED with a1basic, OSI-BASIC etc.
    • Using faster RAM and ROM, It may work even at 14 MHz, which is the limit of MPU and PIA.

Memory Map

System

AddressSizeNameNote
0x0000 - 0x7FFF32KBRAM
0x8000 - 0x87FF2KB(N.C.)/CS80
0x8800 - 0x8FFF2KB(N.C.)/CS88
0x9000 - 0x97FF2KB(N.C.)/CS90
0x9800 - 0x9FFF2KB(N.C.)/CS98
0xA000 - 0xBFFF8KBROMmapped from 0x2000 or 0xA000
0xC000 - 0xC7FF2KB(N.C.)/CSc0
0xC800 - 0xCFFF2KB(N.C.)/CSc8
0xD000 - 0xD7FF2KBPIAassigned to 0xD010
0xD800 - 0xDFFF2KB(N.C.)/CSd8
0xE000 - 0xFFFF8KBROMmapped from 0x6000 or 0xE000

ROM (27C512 64KB)

AddressBankNote
0x0000 - 0x1FFFBank0 (JP1 open)no use
0x2000 - 0x3FFF8KB, mapped to 0xA000
0x4000 - 0x5FFFno use
0x6000 - 0x7FFF8KB, mapped to 0xE000
0x8000 - 0x9FFFBank1 (JP1 close)no use
0xA000 - 0xBFFF8KB, mapped to 0xA000
0xC000 - 0xDFFFno use
0xE000 - 0xFFFF8KB, mapped to 0xE000

License

  • MIT
    • only for PCB
    • firmwares are NOT included.

Author

Parts

43
QtyValueFootprintReferences
90.1uCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2, C4, C5, C6, C7, C8, C9, C10, C11
6MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4, H5, H6
410kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3, R4
2TestPointConnector_Pin:Pin_D0.9mm_L10.0mm_W2.4mm_FlatForkTP1, TP2
10.01uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
110kx8Resistor_THT:R_Array_SIP9RN1
11MHzOscillator:Oscillator_DIP-8X1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
127C512Package_DIP:DIP-28_W15.24mm_SocketU7
1470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
174HC00Package_DIP:DIP-14_W7.62mm_SocketU4
174HC04Package_DIP:DIP-14_W7.62mm_SocketU3
174HC138Package_DIP:DIP-16_W7.62mm_SocketU5
1Arduino_Nano_v2.xModule:Arduino_NanoA1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ3
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1Conn_Coaxial_Powersbc6502a1:A295-CTRPB-1J2
1HM62256BLPPackage_DIP:DIP-28_W15.24mm_SocketU6
1Jumper_2_BridgedConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1LOGOsbc6502a1:6502inside-logoG***
1MCP23S17_SPPackage_DIP:DIP-28_W7.62mmU8
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1
1SW_SPDTsbc6502a1:SS-12D00G3SW2
1W65C02SxPPackage_DIP:DIP-40_W15.24mm_SocketU1
1W65C21SxPPackage_DIP:DIP-40_W15.24mmU2

Similar boards

  • 2 layers182 × 138.8 mm-816-board, the printed circuit board in 3D

    -816-board

    snippyrow/-816-board

    A retro computer motherboard for the W65C816S CPU. Dual-core expandable, 16mb extended memory, four expansion ports.

    141 partsMIT
  • 2 layers225.1 × 167.8 mm6502 computer, the printed circuit board in 3D

    6502 computer

    jp0409hlh/6502_computer

    A computer based on Ben Eater's 6502 series

    81 parts7
  • 2 layers142.2 × 99.1 mmZX81plus38, the printed circuit board in 3D

    ZX81plus38

    Bambelweeny57/Purple-38er

    Build of a ZX81 +38 in Purple PCB's and Keys

    132 parts
  • 4 layers219 × 108.5 mmZ80DevBoard, the printed circuit board in 3D

    Z80DevBoard

    gianluca-rainis/Z80DevBoard

    An advanced development board for the Z80 microprocessor, powered by an RP2040.

    182 parts7CERN-OHL-S-2.0
  • 2 layers99.1 × 99.1 mmAv board, the printed circuit board in 3D

    Av board

    rjw57/buri

    This repository contains my work on designing, building and programming a 6502 microcomputer from scratch. The 6502 was the CPU used in the original Apple 1, BBC Microcomputer, NES console and many other systems from…

    42 parts68MIT
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 2 layers198.1 × 193 mmSTE25, the printed circuit board in 3D

    STE25

    stonedDiscord/Automatenplatinen

    Reverse engineerte Hardware aus deutschen Spielautomaten.

    252 parts5BSD-2-Clause

Questions

How big is the Sbc6502a1 PCB?

It measures 95 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sbc6502a1 use?

43 parts, built around the 74HC00D, 74HC04D, 74HC138 and HM62256BLP-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sbc6502a1 KiCad files?

From the tkhshmsy/sbc6502a1 repository on GitHub, at the commit this page was made from: the board is pcb/sbc6502a1/sbc6502a1.kicad_pcb and its schematic pcb/sbc6502a1/sbc6502a1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sbc6502a1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).