
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.

CMOD S7 Pulse Programmer
PMOD buffer is an open-source printed circuit board by tkeller12, from the tkeller12/CMOD_S7_Pulse repository on GitHub, published under the MIT licence. It is a 4-layer board of 73.7 × 45.7 mm with 46 parts on 42 nets, routed with 261 tracks and 47 vias.
It is built around the RMCF0805FT100R, CRCW080510K0FKEAC and RF2-152-T-00-50-G-HDW, with the KGM21NR71H104KT, CL21A106KOQNNNG and 77313-101-12LF among its other parts. Its parts include 24 resistors, 9 connectors, 5 capacitors and 4 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R9, R10, R11, R12, R15, R16, R17, R18, R21, R22, R23, R24 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R7, R8, R13, R14, R19, R20 |
| 8 | RF2-152-T-00-50-G-HDW | Connector_Coaxial:SMA_Amphenol_132291_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | 74LVC04AT14-13 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U2, U3, U4 |
| 4 | MountingHole_Pad | _tim-Mounting-Holes:4-40_Hole_Pad | H1, H2, H3, H4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 77313-101-12LF | _tim-Headers:PMOD_PinHeader_2x06_P2.54mm_Vertical | J9 |

fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.

inceptionev/PlasmaTransformer
This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.

PCB-Design-MIT/Wi-Fi-Controlled-RGB-Light
A demo board for students to learn to solder and debug

roboryman/prototroller
A full-stack modular controller that is feature-rich, usable, responsive, and robust. Can be used for any HID-compliant purpose, but we focus on developing swappable modules that can form customizable gamepads.

dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project


dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.

dennowiggle/Z8S180-WTM
Repository for sharing Z8S180-WTM design changes only. A private repository.
It measures 73.7 × 45.7 mm and has 4 copper layers, 1.6 mm thick.
46 parts, built around the RMCF0805FT100R, CRCW080510K0FKEAC, RF2-152-T-00-50-G-HDW and KGM21NR71H104KT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tkeller12/CMOD_S7_Pulse repository on GitHub, at the commit this page was made from: the board is Hardware/PMOD_buffer/PMOD_buffer.kicad_pcb and its schematic Hardware/PMOD_buffer/PMOD_buffer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).