

8BIT ROW
SRAM from scratch!
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 75
- Pads
- 296
- Tracks, vias
- 1,024, 72
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Oct 2026
- Updated
- 31 Oct 2026
Overview
8BIT ROW is an open-source printed circuit board by tiydwe, from the tiydwe/SRAM repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board with 112 parts on 75 nets, routed with 1,024 tracks and 72 vias.
Its parts include 72 transistors, 16 resistors, 8 capacitors, 8 diodes and 8 connectors. It belongs with the retro computing and games boards of this library.
README
README.mdSRAM from scratch
256 bytes of SRAM from discrete sot-23 mosfets built without any ICs!
I'm still working on this project!
More coming to this README eventually.
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | Q_NMOS_GSD | easyeda2kicad:SOT-23-N | Q1, Q2, Q10, Q11, Q13, Q14, Q16, Q17, Q18, Q19, Q20, Q22, Q23, Q25, Q26, Q27 +40 |
| 16 | Q_PMOS_GSD | easyeda2kicad:SOT-23-P | Q3, Q6, Q12, Q15, Q21, Q24, Q30, Q33, Q39, Q42, Q48, Q51, Q57, Q60, Q66, Q69 |
| 8 | 100nC | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 360R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | 47R | Resistor_SMD:R_0603_1608Metric | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 8 | LED | Capacitor_SMD:C_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
More from tiydwe/SRAM
12- 4 layers155 × 170 mm

- 4 layers155 × 170 mm

- 4 layers150 × 150.6 mm

- 2 layers104 × 105.1 mm

- 2 layers114.3 × 96.6 mm

- 4 layers150 × 150 mm

- 4 layers

- 2 layers

- 2 layers

- 2 layers108.3 × 12.1 mm

- 4 layers

- 2 layers

Similar boards
- 4 layers45 × 20 mm

2s 40A PSU and charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
112 parts915 - 4 layers52 × 52 mm

Moto gps rev a1
mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental
112 parts529 - 4 layers65 × 56 mm

- 4 layers50 × 42 mm

- 4 layers31 × 40 mm

OSS Radio 2M70CM
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
112 parts72 - 4 layers66.7 × 37.6 mm

- 4 layers35.4 × 10.8 mm

Thruster Controller V2
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
112 parts43GPL-3.0 - 4 layers53 × 42 mm

MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
112 parts30GPL-3.0
Questions
What parts does the 8BIT ROW use?
112 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8BIT ROW KiCad files?
From the tiydwe/SRAM repository on GitHub, at the commit this page was made from: the board is kicad/sramBoard/8BIT_ROW/8BIT_ROW.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8BIT ROW design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).