

Tt vga clock pmod
VGA Clock PMOD
- Size
- 68.7 × 58.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 34
- Pads
- 85
- Tracks, vias
- 149, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Feb 2024
- Updated
- 28 May 2024
Overview
Tt vga clock pmod is an open-source printed circuit board by TinyTapeout, from the TinyTapeout/tt-vga-clock-pmod repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 68.7 × 58.5 mm with 21 parts on 34 nets, routed with 149 tracks and 4 vias.
It is built around the 10129382-912001BLF. Its parts include 9 resistors, 4 connectors and 3 switches. It belongs with the lEDs and displays boards of this library.
Main components
1README
README.mdVGA Clock PMOD for Tiny Tapeout
A PCB for the Tiny Tapeout VGA Clock project.
More information about the project here: https://www.zerotoasiccourse.com/post/vga_clock_pcb_v2/

Hardware
- 3 Push buttons
- 1 VGA connector
- 3 PMOD connectors (you can also get away with 2)
License
- This project is licensed under the Apache 2.0 license.
- The documentation is licensed under the CC0 License
Open Source Hardware
This board is an OSHWA approved design: ES000023
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10129382-912001BLF | TinyTapeout_PMOD:PinHeader_2x06_P2.54mm_PMODPeriph2B | J1, J2, J3 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6 |
| 3 | 500R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2, SW3 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | MT2, MT2 |
| 1 | DB15_Female_HighDensity | VGA:db15 | J4 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | LOGO2 |
| 1 | PMOD_LOGO | TinyTapeout_PMOD:TT_PMOD_Logo_10mm | LOGO1 |
The 20 most common of 21 parts.
Similar boards
- 2 layers29.3 × 73 mm

- 2 layers45.7 × 20.3 mm

- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0
Questions
How big is the Tt vga clock pmod PCB?
It measures 68.7 × 58.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tt vga clock pmod use?
21 parts, built around the 10129382-912001BLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tt vga clock pmod KiCad files?
From the TinyTapeout/tt-vga-clock-pmod repository on GitHub, at the commit this page was made from: the board is tt-vga-clock-pmod.kicad_pcb and its schematic tt-vga-clock-pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tt vga clock pmod design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).