4 layers95 × 80 mm
Kilsyth
kbeckmann/Kilsyth
Errata: - C9 is not a GPIO on ECP5 F12 and some other variants. To get the LED working put a jumper on pin 31 and 33 on the Wide connector. - FTCLK is not routed to a clock pin.
170 parts110BSD
6 layers17.8 × 61 mm
TinyFPGA EX
tinyfpga/TinyFPGA-EX79Small, but powerful FPGA development board based on the Lattice ECP5.
- Size
- 17.8 × 61 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 242
- Pads
- 638
- Tracks, vias
- 916, 313
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Nov 2018
- Updated
- 2 Jun 2019
Overview
TinyFPGA EX is an open-source printed circuit board by tinyfpga, from the tinyfpga/TinyFPGA-EX repository on GitHub. It is a 6-layer board of 17.8 × 61 mm with 91 parts on 242 nets, routed with 916 tracks and 313 vias.
It is built around the PUSB3FR4Z, DSC6001CI2A-016.0000T and MIC5504-1.2YMT-TR, with the MIC5504-2.5YMT-TR and S27KS0641DPBHI020 among its other parts. Its parts include 43 capacitors, 11 ICs, 10 resistors, 6 connectors and 2 diodes. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
5
PUSB3FR4Z
DFN2510A-10-40℃~+85℃ 0.29pF 1nA 3.3V 3V 5.5V 5A@8/20us Four channels IEC 61000-4-2 TVS Unidirectional DFN2510A-10 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
DSC6001CI2A-016.0000T
SMD3225-4P-40℃~+85℃ 1.3mA 1.71V~3.63V 16MHz CMOS ±25ppm SMD3225-4P Programmable Oscillators ROHSMicrochip TechnologyProgrammable Oscillators
MIC5504-1.2YMT-TR
DFN-4-EP(1x1)-40℃~+125℃@(Tj) 1 1.2V 300mA 5.5V 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive DFN-4-EP(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyUncategorisedMIC5504-2.5YMT-TR
TDFN-4-EP(1x1)-40℃~+125℃@(Tj) 1 175uVrms 2.5V 300mA 5.5V 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TDFN-4-EP(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
S27KS0641DPBHI020
FBGA-24(6x8)FBGA-24(6x8) SRAM ROHSInfineon TechnologiesSRAM
README
README.mdTinyFPGA-EX
Small, but powerful FPGA development board based on the Lattice ECP5.
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Footprints:C_0201_NoSilk | C3, C10, C13, C15, C18, C24, C26, C28, C29, C30, C34, C39, C41, C44, C45, C46 +3 |
| 12 | TEST | Footprints:small-testpoint | TP1, TP11, TP12, TP12, TP12, TP12, TP12, TP12, TP12, TP12, TP12, TP13 |
| 8 | 10nf | Footprints:C_0201_NoSilk | C4, C7, C11, C12, C14, C16, C31, C35 |
| 5 | 1uF | Footprints:C_0402_NoSilk | C1, C17, C20, C42, C43 |
| 3 | 10nF | Footprints:C_0201_NoSilk | C8, C38, C40 |
| 3 | 10uF | Capacitors_SMD:C_0603 | C5, C23, C33 |
| 2 | 0 | Footprints:R_0201_NoSilk | R3, R8 |
| 2 | 4.7K | Footprints:R_0402_NoSilk | R12, R13 |
| 2 | 4.7k | Footprints:R_0201_NoSilk | R5, R7 |
| 2 | 4.7k | Footprints:R_0402_NoSilk | R4, R10 |
| 2 | Conn_01x24 | Pin_Headers:Pin_Header_Straight_1x24_Pitch2.54mm | J4, J5 |
| 2 | LED | LEDs:LED_0603 | D1, D2 |
| 2 | PUSB3FR4Z | Footprints:PUSB3FR4Z | U10, U11 |
| 1 | 1.5k | Footprints:R_0201_NoSilk | R11 |
| 1 | 100K | Footprints:R_0402_NoSilk | R6 |
| 1 | 100nF | Footprints:C_0402_NoSilk | C2 |
| 1 | 1nF | Footprints:C_0201_NoSilk | C36 |
| 1 | 1nF | Capacitors_SMD:C_0201_NoSilk | C37 |
| 1 | 1uH | Inductors_SMD:L_0805 | L2 |
| 1 | 2.2uF | Footprints:C_0402_NoSilk | C19 |
| 1 | 22uF | Capacitors_SMD:C_0603 | C22 |
| 1 | 330nH | Inductors_SMD:L_0805 | L1 |
| 1 | Conn_02x03_Counter_Clockwise | Footprints:ASG2-D-X-B | U6 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch1.00mm_SMD | J1 |
| 1 | Conn_02x09_Odd_Even | Pin_Headers:Pin_Header_Straight_2x11_Pitch2.54mm_SMD | J6 |
| 1 | DSC6001CI2A-016.0000T | Footprints:DSC6001HI2A | U3 |
| 1 | FAN53555 | Footprints:WLCSP-20 | U4 |
| 1 | FAN53600 | Footprints:WLCSP-6 | U7 |
| 1 | LFE5UM-285 | Footprints:csfBGA 285 | U1 |
| 1 | MIC5504-1.2YMT-TR | Footprints:Thin-DFN4 | U9 |
| 1 | MIC5504-2.5YMT-TR | Footprints:Thin-DFN4 | U5 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Footprints:DM3D-SF | J2 |
| 1 | S25FL064L | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U8 |
| 1 | S27KS0641DPBHI020 | Footprints:FBGA-24 | U2 |
| 1 | SW_Push | Footprints:PTS_810_SMT_Switch | SW1 |
| 1 | USBC | tinyfpga_boards:USBC_DX07S024JJ2R1300 | J3 |
The 87 most common of 91 parts.
Similar boards
- 4 layers100 × 60 mm
- 4 layers91 × 83 mm
- 2 layers17.8 × 35.6 mm
TinyFPGA B
tinyfpga/TinyFPGA-B-Series
Open source design files for the TinyFPGA B-Series boards.
36 parts202GPL-3.0 - 2 layers17.8 × 35.6 mm
- 4 layers217 × 139 mm
- 4 layers
- 2 layers71 × 40 mm
Questions
How big is the TinyFPGA EX PCB?
It measures 17.8 × 61 mm and has 6 copper layers, 1.6 mm thick.
What parts does the TinyFPGA EX use?
91 parts, built around the PUSB3FR4Z, DSC6001CI2A-016.0000T, MIC5504-1.2YMT-TR and MIC5504-2.5YMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyFPGA EX KiCad files?
From the tinyfpga/TinyFPGA-EX repository on GitHub, at the commit this page was made from: the board is board/TinyFPGA-EX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyFPGA EX design in my own project?
Its repository states no licence, so its author keeps all rights: ask tinyfpga before reusing the design.