

IsoSPI interface
A BMS Design for the 400V HRB project.
- Size
- 34 × 11.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 14
- Pads
- 40
- Tracks, vias
- 51, 5
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Dec 2023
- Updated
- 26 Dec 2023
Overview
IsoSPI interface is an open-source printed circuit board by tinkeringjoe, from the tinkeringjoe/HRBbms repository on GitHub, published under the MIT licence. It is a 2-layer board of 34 × 11.9 mm with 10 parts on 14 nets, routed with 51 tracks and 5 vias.
It is built around the HM2101NLT. Its parts include 3 resistors, 3 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 1 | 1.21K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 806 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | HM2101NLT | footprints:HM2101NLT_PUL | XMER1 |
| 1 | LTC6820HMS-TRPBF | footprints:MS_05-08-1669_ADI | U1 |
More from tinkeringjoe/HRBbms
1- 2 layers76.2 × 66 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the IsoSPI interface PCB?
It measures 34 × 11.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IsoSPI interface use?
10 parts, built around the HM2101NLT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IsoSPI interface KiCad files?
From the tinkeringjoe/HRBbms repository on GitHub, at the commit this page was made from: the board is isoSPI_interface/isoSPI_interface.kicad_pcb and its schematic BMS Slave Prototype/BMS Slave Prototype.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IsoSPI interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).