Skip to the content
2 layers76.2 × 66 mmBMS Slave Prototype, the printed circuit board in 3D

BMS Slave Prototype

tinkeringjoe/HRBbms

A BMS Design for the 400V HRB project.

Size
76.2 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
97
Nets
111
Pads
289
Tracks, vias
453, 165
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
11 Dec 2023
Updated
26 Dec 2023

Overview

BMS Slave Prototype is an open-source printed circuit board by tinkeringjoe, from the tinkeringjoe/HRBbms repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.2 × 66 mm with 97 parts on 111 nets, routed with 453 tracks and 165 vias.

It is built around the ADBMS1818ASWAZ and HM2101NLT. Its parts include 45 resistors, 23 capacitors, 13 fuses, 7 connectors and 2 ICs. It belongs with the power boards of this library.

Main components

2

Parts

97
QtyValueFootprintReferences
1910Resistor_SMD:R_0805_2012MetricR15, R16, R23, R24, R25, R26, R27, R28, R29, R30, R37, R38, R39, R40, R41, R42 +3
1410nFCapacitor_SMD:C_0805_2012MetricC6, C7, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23
120.25AFuse:Fuse_0603_1608MetricF1, F2, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13
1230Resistor_SMD:R_0805_2012MetricR17, R18, R19, R20, R21, R22, R31, R32, R33, R34, R35, R36
449.9Resistor_SMD:R_0805_2012MetricR9, R10, R11, R12
4Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J4, J5
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
31uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3
20.1uFCapacitor_SMD:C_0805_2012MetricC9, C11
210KResistor_SMD:R_0805_2012MetricR1, R2
21MResistor_SMD:R_0805_2012MetricR3, R13
2HM2101NLTfootprints:HM2101NLT_PULXMER1, XMER2
1100Resistor_SMD:R_0805_2012MetricR7
1100pFCapacitor_SMD:C_0805_2012MetricC5
1191KResistor_SMD:R_0805_2012MetricR14
11AFuse:Fuse_0603_1608MetricF3
11N4148Diode_SMD:D_SOD-323D1
11kResistor_SMD:R_0805_2012MetricR5
12.2ufCapacitor_SMD:C_0805_2012MetricC4
122uFCapacitor_SMD:C_0805_2012MetricC10
125.5kResistor_SMD:R_0805_2012MetricR8
13.01kResistor_SMD:R_0805_2012MetricR4
14.7pFCapacitor_SMD:C_0805_2012MetricC8
15kResistor_SMD:R_0805_2012MetricR6
1ADBMS1818ASWAZfootprints:SW-64-2_ADIU1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ6
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ8
1LT8631EFE-PBFfootprints:TSSOP-20_FE&slash_CB_LITU2

More from tinkeringjoe/HRBbms

1
  • 2 layers34 × 11.9 mmIsoSPI interface, the printed circuit board in 3D

    IsoSPI interface

    tinkeringjoe/HRBbms

    A BMS Design for the 400V HRB project.

    10 partsMIT

Similar boards

  • 2 layers142 × 58 mmBosch 88pin Breakout, the printed circuit board in 3D

    Bosch 88pin Breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    97 parts1.2k
  • 2 layers99.8 × 99.8 mmDb25 bob, the printed circuit board in 3D

    Db25 bob

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    97 parts990GPL-3.0
  • 2 layers380 × 45 mmAddOnC, the printed circuit board in 3D

    AddOnC

    freeDSP/freeDSP-aurora

    freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

    97 parts226CC-BY-SA-4.0
  • 2 layers100 × 110 mmKicad control board smt, the printed circuit board in 3D

    Kicad control board smt

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    97 parts171
  • 2 layers40 × 100 mmFront prototype, the printed circuit board in 3D

    Front prototype

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    97 parts148GPL-3.0
  • 2 layers100 × 95 mm35C3XMR, the printed circuit board in 3D

    35C3XMR

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    97 parts115
  • 2 layers66 × 62 mmCh570aaonlyswadge, the printed circuit board in 3D

    Ch570aaonlyswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    97 parts114

Questions

How big is the BMS Slave Prototype PCB?

It measures 76.2 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BMS Slave Prototype use?

97 parts, built around the ADBMS1818ASWAZ and HM2101NLT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BMS Slave Prototype KiCad files?

From the tinkeringjoe/HRBbms repository on GitHub, at the commit this page was made from: the board is BMS Slave Prototype/BMS Slave Prototype.kicad_pcb and its schematic BMS Slave Prototype/BMS Slave Prototype.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BMS Slave Prototype design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).