Skip to the content
2 layers110 × 116.3 mmTOFE Milkymist, the printed circuit board in 3D

A board which adds control interfaces and audio for Milkymist compatibility for use with TOFE-8x hosts like the Numato Opsis.

Size
110 × 116.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
116
Nets
117
Pads
561
Tracks, vias
1,675, 208
Pours
4
Routed
Yes
KiCad
KiCad 3
Created
26 Oct 2015
Updated
27 Apr 2018

Overview

TOFE Milkymist is an open-source printed circuit board by timvideos, from the timvideos/HDMI2USB-TOFE-Milkymist repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 110 × 116.3 mm with 116 parts on 117 nets, routed with 1,675 tracks and 208 vias.

It is built around the SN74LVC1G17DBV, ST3232CDR and LM4550VH, with the ISL83490 among its other parts. Its parts include 39 capacitors, 33 resistors, 12 switches, 9 ICs and 8 connectors. It belongs with the interfaces and adapters boards of this library.

Main components

4

README

README.md

Milkymist Compatibility - TOFE Expansion board

The Numato Opsis board is already very similar to the Milkymist M1 and Mixxeo devices created by M-Labs, but lacks the DJ hardware interfaces. This expansion board adds these missing components.

This board can be ordered from the Numato Opsis page on CrowdSupply.com.

Board Image

Features

This extension board has the following features;

  • AC‘97 compatible audio interface with Microphone, Headphones, Line In + Out (on standard 3.5mm connectors).

  • RS-422 / RS-485 compatible high speed (10Mbps), full duplex serial port;

    • Compatible with wide range of interfaces including the industry standard DMX512 control protocol.

    • Connected to screw terminal headers, allowing wiring to DB-9, RJ-12, XLR-5, XLR-3 or RJ-45 connectors (wiring diagrams provided).

  • RS-232 full duplex serial port on a standard DB-9 connector. Supporting connection to wide range of devices with serial ports. (A secondary RS-232 full duplex serial port on a standard screw terminal.)

  • MIDI In and Out interfaces on screw terminals, supporting connection to wide range of musical instruments and control devices.

  • Infrared transmitter and receiver compatible with manys consumer remote protocols.

  • 4 x Push button Switches,

  • 4 x Indicator LEDs,

  • 2 x Digilent Pmod™ Compatible headers to allow usage of existing expansion boards, including boards froms Numato Lab, Digilent, Maxim ands Analog.

A PDF version of the schematic can be found in the docs directory.

Editing

The design in this repository was made using KiCad version 2013-07-07 BZR 4022 (the version is Ubuntu Trusty).

License

TOFE MilkyMist Compatibility Expansion board by Numato Systems Pvt. Ltd

TOFE MilkyMist Compatibility Expansion board is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

You should have received a copy of the license along with this work. If not, see http://creativecommons.org/licenses/by-sa/4.0/.

Creative Commons License Logo

Parts

116
QtyValueFootprintReferences
81uFSM0603C1, C2, C3, C9, C12, C16, C20, C25
70.1uFSM0603C5, C7, C8, C11, C13, C28, C33
610KSM0603R15, R18, R19, R20, R21, R22
6CONN_2ScrewTerm2_138MILK1, K2, K5, K6, K7, K8
5220pFSM0603C4, C21, C22, C26, C27
40.1uFSM0603_CapaC29, C30, C31, C32
4220RSM0603_Resistor_newR25, R26, R27, R28
46.81KSM0603R2, R3, R5, R6
4AUDIO_JACK_3535NG3.5MM_Stereo_Jack_SocketCON1, CON2, CON3, CON4
4LEDLED-0805-NewD2, D5, D6, D7
4SW_PUSHSwitch_SMD_newSW1, SW2, SW3, SW4
30.1uFSM0603_Capa_newC34, C35, C38
34.75KSM0603R11, R12, R13
34.7uHSM0805L1, L2, L3
2100uFSM1210C10, C17
215pFSM0603_CapaC36, C37
220pFSM0603C19, C23
2220uFC_ElectrolyticC18, C24
227.4SM0603R9, R10
2CONN_3ScrewTerm3_138MILK3, K4
2CONN_6X2pin_array_6x2P4, P5
2DIODEDO214AAD3, D4
2GS2PIN_ARRAY_2X1GS1, GS2
10RSM0603R14
110KRES_NET4R32
110KSM0603_Resistor_newR33
110uFSM0603_Capa_newC39
11KSM0603_Resistor_newR24
11KSM0603R1
11MSM0402R17
12.2KSM0603R8
12.2uFSM0603C6
122nFSM0603C15
124AA01/24LC01BSOT23-5_24AA01U7
12K2SM0603_Capa_newR30
13.3uFSM0603C14
147KSM0603R4
147RSM0603R7
147RSM0603_Resistor_newR23
160RSM0603_Resistor_newR29
1680RRES_NET4R31
17805_NDPAK2U2
1CONN_4X2pin_array_4x2P2
1CRYSTALHC-49VX1
1DB9DB9_FemaleJ1
1IR-LEDLEDVD1
1IR-RXIR_REC_THU6
1ISL83490SOIC-8_ISL83490U5
1LM4550LQFP48U1
1LOGOLOGOG***
1PC817SMD_PC817IC1
1RSM0603R16
1SN74LVC1G17SOT23-5_SN74LVC1G17DBVRU4
1ST3232CDRSO16_NU3
1TOFE-8XNumatoOpsis_PCIe_8X_HL_NW_123U8
1TRANSISTOR-NPNSOT23-TRANSISTOR-NPNQ1

Similar boards

  • 4 layers243.8 × 245.5 mmNeotron Common Hardware, the printed circuit board in 3D

    Neotron Common Hardware

    Neotron-Compute/Neotron-Common-Hardware

    Contains KiCad footprints and symbols shared across multiple Neotron projects.

    287 parts4CC-BY-SA-4.0
  • 4 layers50 × 63 mmAc97 pmod, the printed circuit board in 3D

    Ac97 pmod

    westonb/ac97-breakout

    AC97 Audio Codec board for Nexys 4 FPGA Board

    57 parts2
  • 2 layers77.5 × 40.6 mmLink adapter, the printed circuit board in 3D

    Link adapter

    jkominek/piano-conversion

    Hardware, and some firmware, for acoustic piano to MIDI controller conversion.

    42 parts53
  • 4 layers92.7 × 83.8 mmADC Board, the printed circuit board in 3D

    ADC Board

    kitspace-test-repos/kicad6-file-collection

    132 partsMIT
  • 4 layers100 × 100 mmPintry X2, the printed circuit board in 3D

    Pintry X2

    icamaster/Pintry

    Two bay NAS based on the Raspberry Pi Compute Module 4

    193 parts26MIT
  • 2 layers20.3 × 104.3 mmExpander just back, the printed circuit board in 3D

    Expander just back

    plinkysynth/plinky-expander

    hardware design of a small expander for the plinky synth

    62 parts19
  • 4 layers101.6 × 111.5 mmDaisyplusdac, the printed circuit board in 3D

    Daisyplusdac

    lichen-community-systems/signaletic

    A music signal processing library designed for embedded environments and Web Assembly, in C

    117 parts9MIT

Questions

How big is the TOFE Milkymist PCB?

It measures 110 × 116.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TOFE Milkymist use?

116 parts, built around the SN74LVC1G17DBV, ST3232CDR, LM4550VH and ISL83490. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TOFE Milkymist KiCad files?

From the timvideos/HDMI2USB-TOFE-Milkymist repository on GitHub, at the commit this page was made from: the board is board/TOFE-Milkymist.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TOFE Milkymist design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).