

Urban moose
- Size
- 27.4 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 39
- Pads
- 214
- Tracks, vias
- 495, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Jan 2015
- Updated
- 30 Nov 2015
Overview
Urban moose is an open-source printed circuit board by timhawes, from the timhawes/urban_moose repository on GitHub. It is a 2-layer board of 27.4 × 49.5 mm with 52 parts on 39 nets, routed with 495 tracks and 48 vias.
It is built around the NRF51822-QFAA-R, BMP180 and DS18B20, with the SHT21 and CR2032 among its other parts. Its parts include 19 capacitors, 11 resistors, 5 ICs, 5 inductors and 3 diodes. It belongs with the nRF52 and nRF5x boards of this library.
Main components
5NRF51822-QFAA-R
QFN-48-EP(6x6)QFN-48-EP(6x6) Microcontrollers (MCU/MPU/SOC) ROHSNordic SemiconMicrocontrollers (MCU/MPU/SOC)BMP180
LGA-7LGA-7 Pressure Sensors ROHSBosch SensortecPressure SensorsDS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsSHT21
6-DFN (3x3)Humidity 0 - 100% RH and Temperature -40°C to +125°C Sensor (Digital output, I²C Interface)SensirionUncategorisedCR2032
-- Unclassified goods ROHSMaxellUncategorised
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitors_SMD:C_0402 | C8, C11, C13, C14, C16 |
| 4 | 12pF | Capacitors_SMD:C_0402 | C1, C2, C18, C19 |
| 4 | 4K7 | Resistors_SMD:R_0402 | R4, R8, R9, R10 |
| 3 | LED | LEDs:LED-0603 | D2, D3, D4 |
| 2 | 0R | Resistors_SMD:R_0402 | R1, R7 |
| 2 | 10K | Resistors_SMD:R_0402 | R6, R12 |
| 2 | MOSFET_N | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q1, Q2 |
| 1 | 1.0nF | Capacitors_SMD:C_0402 | C9 |
| 1 | 1.0pF | Capacitors_SMD:C_0402 | C4 |
| 1 | 1.0uF | Capacitors_SMD:C_0603 | C12 |
| 1 | 1.5pF | Capacitors_SMD:C_0402 | C6 |
| 1 | 10nH | Resistors_SMD:R_0402 | L2 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C17 |
| 1 | 10uH | Resistors_SMD:R_0603 | L4 |
| 1 | 12K | Resistors_SMD:R_0402 | R5 |
| 1 | 15nH | Resistors_SMD:R_0402 | L5 |
| 1 | 15uF | Capacitors_SMD:C_1206 | C15 |
| 1 | 16MHz | timhawes:CX2520DB | X1 |
| 1 | 2.2nF | Capacitors_SMD:C_0402 | C3 |
| 1 | 2.2pF | Capacitors_SMD:C_0402 | C5 |
| 1 | 3.3nH | Resistors_SMD:R_0402 | L3 |
| 1 | 30R | Resistors_SMD:R_0402 | R11 |
| 1 | 32.768kHz | timhawes:FC-135 | X2 |
| 1 | 4.4uF | Capacitors_SMD:C_0603 | C7 |
| 1 | 4.7nH | Resistors_SMD:R_0402 | L1 |
| 1 | 47nF | Capacitors_SMD:C_0402 | C10 |
| 1 | 820R | Resistors_SMD:R_0402 | R13 |
| 1 | ANT | timhawes:ANT-2.4GHz | P3 |
| 1 | BMP180 | timhawes:BMP180 | U3 |
| 1 | CR2032 | timhawes:BAT-HLD-001 | BT1 |
| 1 | DS18B20 | Pin_Headers:Pin_Header_Straight_1x03 | U2 |
| 1 | EXT | Pin_Headers:Pin_Header_Straight_1x10 | P2 |
| 1 | SHT21 | timhawes:SHT21 | U5 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | SW_PUSH | timhawes:EVQPT5 | SW1 |
| 1 | Si1145 | timhawes:Si114x | U4 |
| 1 | nRF51822-QFAA | Housings_DFN_QFN:UQFN-48-1EP_6x6mm_Pitch0.4mm | U1 |
Similar boards
- 2 layers56 × 90 mm

- 4 layers150 × 72 mm

FIAControl
CatoLynx/LCD-FIA
Custom hardware and software for a LCD platform passenger information display
110 parts7 - 2 layers100 × 30 mm

- 2 layers

- 2 layers41 × 41.1 mm

Sensor logger
hsl25/Sensor-Logger-PCB
PCB design project - the sensor logger board features an IMU, temperature and humidity sensor, LCD screen and micro-SD card data storage.
60 parts1 - 2 layers93.9 × 83.8 mm

- 4 layers90 × 140 mm

Eeg hardware v1
es-ude/eeg-hardware
Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller
460 partsMIT - 2 layers103.8 × 122 mm

Prueba1
francojsantander22-afk/main_board_habp
Placa principal (main board) del sistema de adquisición de datos y telemetría para un globo meteorológico de alta altitud (HABP – High Altitude Balloon Project), diseñada en KiCad.
26 parts
Questions
How big is the Urban moose PCB?
It measures 27.4 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Urban moose use?
52 parts, built around the NRF51822-QFAA-R, BMP180, DS18B20 and SHT21. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Urban moose KiCad files?
From the timhawes/urban_moose repository on GitHub, at the commit this page was made from: the board is urban_moose.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Urban moose design in my own project?
Its repository states no licence, so its author keeps all rights: ask timhawes before reusing the design.