4 layers150 × 72 mm
FIAControl
CatoLynx/LCD-FIA
Custom hardware and software for a LCD platform passenger information display
110 parts7
2 layers
Cepelin
frizider-si/delavnice2opisi delavnic in materiali
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 29
- Pads
- 109
- Tracks, vias
- 378, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 30 Oct 2015
- Updated
- 23 Oct 2016
Overview
Cepelin is an open-source printed circuit board by frizider-si, from the frizider-si/delavnice repository on GitHub. It is a 2-layer board with 18 parts on 29 nets, routed with 378 tracks and 11 vias.
It is built around the ATMEGA168A-AU, LB1973JA-AH and SHT21, with the TSOP58238 among its other parts. Its parts include 6 connectors, 4 ICs, 4 diodes, 2 switches and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA168A-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LB1973JA-AH
SSOP-16-4.4mm-20℃~+85℃ 1.8V~7.5V 2 Bipolar Driver Over temperature protection SSOP-16-4.4mm Stepper Motor Driver ROHSonsemiMotor Driver ICs
SHT21
6-DFN (3x3)Humidity 0 - 100% RH and Temperature -40°C to +125°C Sensor (Digital output, I²C Interface)SensirionUncategorised
TSOP58238
插件-25℃~+85℃ 2.5V~5.5V 38kHz 40m 700uA 插件 Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)
README
README.mdDelavnice v Frižiderju
Za Frižiderjeve delavnice največkrat pripravimo kakšna navodila. Ta lahko seveda uporabljaš tudi izven Frižiderja, doma, ali pa kjerkoli. V navodilih so tudi dostikrat kakšna vprašanja, ali pa izzivi. Jih znaš rešiti?
Navodila so dostopna naslednje delavnice:
Delavnice, ki smo jih izvedli, pa za njih navodila šele pripravljamo, so:
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | CONN_2 | PINHEAD1-2 | P1, P2, P3, P4, P5 |
| 4 | LED | LED-3MM | D1, D2, D3, D4 |
| 2 | LB1973JA | SSOP16 | IC2, IC3 |
| 1 | 100nF | SM1206 | C1 |
| 1 | ATMEGA168A-A | TQFP32 | IC1 |
| 1 | AVR-ISP-6 | pin_array_3x2 | CON1 |
| 1 | BATTERY | PINHEAD1-2 | BT1 |
| 1 | MS-5561-C | MS5607 | S2 |
| 1 | SHT21 | SHT21 | S1 |
| 1 | TSOP58238 | TSOP58238 | U1 |
Similar boards
- 2 layers100 × 30 mm
- 2 layers56 × 90 mm
- 2 layers41 × 41.1 mm
Sensor logger
hsl25/Sensor-Logger-PCB
PCB design project - the sensor logger board features an IMU, temperature and humidity sensor, LCD screen and micro-SD card data storage.
60 parts1 - 2 layers93.9 × 83.8 mm
- 4 layers90 × 140 mm
Eeg hardware v1
es-ude/eeg-hardware
Repo of the Custom Hardware Design Files of the EEG-based Gaming Controller
460 partsMIT - 2 layers103.8 × 122 mm
Prueba1
francojsantander22-afk/main_board_habp
Placa principal (main board) del sistema de adquisición de datos y telemetría para un globo meteorológico de alta altitud (HABP – High Altitude Balloon Project), diseñada en KiCad.
26 parts - 4 layers140 × 54 mm
Picoclock
locked/picoclock
This repo is an attempt at building a Pico based alarm clock. It was created for my kids and features:
146 parts
Questions
What parts does the Cepelin use?
18 parts, built around the ATMEGA168A-AU, LB1973JA-AH, SHT21 and TSOP58238. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cepelin KiCad files?
From the frizider-si/delavnice repository on GitHub, at the commit this page was made from: the board is dron-cepelin/pcb/cepelin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cepelin design in my own project?
Its repository states no licence, so its author keeps all rights: ask frizider-si before reusing the design.