2 layers69 × 49 mm
2 layers100 × 100 mm
PCBpanel
timelab/ADEM-hardware- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 76
- Pads
- 413
- Tracks, vias
- 1,010, 66
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Aug 2016
- Updated
- 27 Sep 2017
Overview
PCBpanel is an open-source printed circuit board by timelab, from the timelab/ADEM-hardware repository on GitHub. It is a 2-layer board of 100 × 100 mm with 107 parts on 76 nets, routed with 1,010 tracks and 66 vias.
It is built around the ESP-12E, BMP180 and HTU21D, with the AP1117DG, BSS138 and BSS84 among its other parts. Its parts include 20 capacitors, 19 resistors, 13 ICs, 12 connectors and 6 diodes. It belongs with the ESP8266 boards of this library.
Main components
6
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
BMP180
LGA-7LGA-7 Pressure Sensors ROHSBosch SensortecPressure Sensors
HTU21D
DFN-6-EP(3x3)-40℃~+125℃ 0%RH~100%RH 1.5V~3.6V 450uA 8bit、12bit、14bit Factory calibration、Built-in temperature and humidity compensation、Built-in heater、Derived quantity calculation I2C ±0.3℃ ±2%RH DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSTE ConnectivityTemperature And Humidity Sensor
AP1117DG
SOT-223-40℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 70dB@(180Hz) Adjustable、Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdADEM-hardware
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C | Capacitors_SMD:C_1206_HandSoldering | C1, C1, C2, C2, C3, C3, C4, C4, C5, C5, C6, C6 |
| 8 | 10K | Resistors_SMD:R_1206_HandSoldering | R3, R4, R5, R5, R5, R6, R6, R6 |
| 8 | R | Resistors_SMD:R_1206_HandSoldering | R1, R1, R2, R2, R3, R3, R4, R4 |
| 4 | 1V8 | Diodes_SMD:D_1206 | D2, D2, D3, D3 |
| 4 | GS_A0 | Connect:GS3 | A_MPU1, A_MPU1, A_NV1, A_NV1 |
| 3 | CONN_01X05 | Pin_Headers:Pin_Header_Angled_1x05 | P_I2CGPS1, P_I2CGPS1, P1 |
| 2 | Adem_Kicad_logos:adem_logo | , | |
| 2 | Adem_Kicad_logos:adem_logo-txt_17_B_silk | , | |
| 2 | 10u | Capacitors_SMD:C_1206_HandSoldering | C3, C4 |
| 2 | 5V | Connect:PINHEAD1-2 | 5V1, 5V1 |
| 2 | BMP180 | ADEM:BMP180 | U6, U6 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 2 | C | Capacitors_SMD:C_1210_HandSoldering | C1, C2 |
| 2 | CONN_01X03 | Connect:PINHEAD1-3 | P2, P2 |
| 2 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P3, P3 |
| 2 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | P_SENS1, P_SENS1 |
| 2 | CONN_01X09 | Pin_Headers:Pin_Header_Straight_1x09 | P2, P3 |
| 2 | CONN_01X13 | Pin_Headers:Pin_Header_Straight_1x13 | P1, P3 |
| 2 | CONN_buzz | Connect:PINHEAD1-2 | P1, P1 |
| 2 | CP | Capacitors_Elko_ThroughHole:Elko_vert_11.2x6.3mm_RM2.5 | C7, C7 |
| 2 | DIODE | Diodes_SMD:SMB_Handsoldering | D1, D1 |
| 2 | ESP8266_THING | ADEM:ESP8266_THING | U3, U3 |
| 2 | GS3 | GS3 | GS1, GS2 |
| 2 | GS_A1 | Connect:GS3 | A_NV2, A_NV2 |
| 2 | GS_A2 | Connect:GS3 | A_NV3, A_NV3 |
| 2 | GS_VCC | Connect:GS3 | VCC_SEL1, VCC_SEL1 |
| 2 | HTU21D | ADEM:HTU21D | U7, U7 |
| 2 | MPU6050 | ADEM:MPU6050_angled | U4, U4 |
| 2 | NPN | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1, Q1 |
| 2 | NVSRAM | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5, U5 |
| 2 | S1 | Connect:GS2 | S1, S1 |
| 2 | S2 | Connect:GS2 | S2, S2 |
| 1 | 0.1 u | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 100K | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 2u2 | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 470K | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | AP1117 | sot:SOT223 | U2 |
| 1 | ARDUPROMINI-6 | ArduProMiniTKB:ArduProMini-6 | uP1 |
| 1 | BSS84 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | FTDI1 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | GY-NEO6MV2 | ADEM:GY-NEO6MV2 | U1 |
| 1 | R | Resistors_SMD:R_1210_HandSoldering | R1 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_EVPBF | SW1 |
The 105 most common of 107 parts.
More from timelab/ADEM-hardware
2- 2 layers29 × 49 mm
Similar boards
- 2 layers93 × 42 mm
ADEM
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
29 parts13LGPL-3.0 - 2 layers20.4 × 45.1 mm
WxBackpack
jrleeman/WxBackpack
Backpack board for the Light Blue Bean containing weather sensors.
57 parts - 4 layers50.8 × 25.4 mm
- 2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
100 parts2GPL-3.0 - 2 layers25.4 × 54.6 mm
- 2 layers52.1 × 29.8 mm
Irremote
takigama/HomeAutomationExperiments
Some of my home automation experiments involving arduino, esp, lights and other things
34 parts11 - 2 layers55 × 45.6 mm
- 2 layers38.1 × 22.9 mm
Questions
How big is the PCBpanel PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCBpanel use?
107 parts, built around the ESP-12E, BMP180, HTU21D and AP1117DG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCBpanel KiCad files?
From the timelab/ADEM-hardware repository on GitHub, at the commit this page was made from: the board is PCBpanel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCBpanel design in my own project?
Its repository states no licence, so its author keeps all rights: ask timelab before reusing the design.