

Remote
Building a self-stabilizing RC hydrofoil.
- Size
- 80 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 35
- Pads
- 69
- Tracks, vias
- 93, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Apr 2026
- Updated
- 14 Aug 2026
Overview
Remote is an open-source printed circuit board by timbelmon, from the timbelmon/CAD_Hydrofoil repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 65 mm with 16 parts on 35 nets, routed with 93 tracks and 7 vias.
Its parts include 3 capacitors, 2 resistors, 2 connectors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdCAD Hydrofoil
Semester project focused on developing a self-stabilizing RC hydrofoil.
The system uses a T-foil design with custom PCB-based water sensors acting as the control “legs” to detect water contact and stabilize the craft in real time.
Core components:
- Custom-designed hydrofoil (CAD)
- Self-manufactured PCBs (water sensing + control)
- Arduino-based control system
The goal is to create a fully integrated, self-stabilizing hydrofoil platform combining mechanical design, electronics, and embedded control.
Basic Sketch

Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100n | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 2 | NetTie_2 | LibraryNewHoleSize:NetTie_1.6mm | NT1, NT2 |
| 1 | 10k | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | R2 |
| 1 | 10u | LibraryNewHoleSize:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Arduino_Nano_v3.x | LibraryNewHoleSize:Arduino_Nano_WithMountingHoles | A1 |
| 1 | NRF24L01_Breakout | LibraryNewHoleSize:nRF24L01_Breakout | U1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J1 |
More from timbelmon/CAD_Hydrofoil
3- 2 layers150 × 60 mm

- 2 layers86 × 42 mm

- 2 layers200 × 40 mm

Similar boards
- 2 layers140.5 × 30 mm

Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm

U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm

Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm

V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm

Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm

Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm

- 2 layers21.1 × 26.9 mm

Questions
How big is the Remote PCB?
It measures 80 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote KiCad files?
From the timbelmon/CAD_Hydrofoil repository on GitHub, at the commit this page was made from: the board is KiCad_Remote/Remote.kicad_pcb and its schematic KiCad_Batterypack/KiCad_Batterypack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).