

Mainboard v13
TIGERs Mannheim Open-Source Electronics
- Size
- 80 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 204
- Pads
- 683
- Tracks, vias
- 2,005, 386
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Apr 2020
- Updated
- 9 Jul 2025
Overview
Mainboard v13 is an open-source printed circuit board by TIGERs-Mannheim, from the TIGERs-Mannheim/electronics repository on GitHub. It is a 4-layer board of 80 × 85 mm with 118 parts on 204 nets, routed with 2,005 tracks and 386 vias.
It is built around the SKY66112-11, LIS3MDL and MP34DT05, with the ICM-20689, LP5907MFX-3.3 and ASE-4.000MHZ-LC-T among its other parts. Its parts include 59 capacitors, 12 ICs, 10 resistors, 8 inductors and 4 diodes. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
Main components
7SKY66112-11
QFN-22-EP(3x3.5)-10dB -12dB -12dB -40℃~+85℃ -8dBm 0dBm 1.8V~3.6V 1uA 2.4GHz~2.483GHz 21dBm Bluetooth、ZigBee QFN-22-EP(3x3.5) RF Front End Circuits ROHSSkyworks SolutionsRF Front End CircuitsLIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsMP34DT05
--40℃~+85℃ 1.8V 1mm 3mm 4mm 64dB 650uA Omnidirectional - MEMS Microphones ROHSSTMicroelectronicsMEMS MicrophonesICM-20689
QFN-24-EP(4x4)-40℃~+85℃ 1.71V~3.45V 16bit 4KB IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersLP5907MFX-3.3
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 12uA 250mA 250mV@(250mA) 3.3V 5.5V 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsASE-4.000MHZ-LC-T
SMD3225-4PSMD3225-4P Crystal Oscillators ROHSAbraconCrystal OscillatorsFL520WFMT1
SMD3225-4P-40℃~+100℃ 12pF 30Ω 52MHz ±17ppm ±7ppm SMD3225-4P Crystals ROHSDiodes IncorporatedCrystals
README
README.mdTIGERs Mannheim Open-Source Electronics
This repository contains electronics for our robots and our base station. There is one folder for each released version.
Have a look at our 2020 ETDP which contains many details about design decisions and lessons learned over the last 10 years.
The following files are present for each release.
EAGLE
Electronics are designed with Autodesk EAGLE which is available for free for students. This folder contains all schematics (.sch) and board (.brd) files.
KiCad9
EAGLE files converted to KiCad version 9. Files got only a light cleanup pass. Note that no PCBs were ever produced using these files. The EAGLE files are still the ground truth.
All schematics are also available as PDF files. This makes it easier to view them without a need to install EAGLE.
CAM
CAM jobs for EAGLE. Used to produce manufacturing data from board files.
Gerber
Production ready zip packages for all boards. Most PCB production services directly accept gerber files.
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n | Mainboard v13:C0603_334 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21, C24, C26, C27 +15 |
| 12 | 100 | Mainboard v13:EXB28V_342 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8, RN9, RN10, RN11, RN12 |
| 10 | 10u | Mainboard v13:C0603_334 | C4, C5, C20, C22, C23, C25, C28, C32, C54, C55 |
| 7 | 120R | Mainboard v13:L0603 | L1, L2, L3, L4, L5, L6, L7 |
| 5 | 1n | Mainboard v13:C0603_334 | C35, C37, C48, C50, C52 |
| 4 | 1k | Mainboard v13:R0603_334 | R1, R2, R9, R10 |
| 3 | WIREPAD5,4/3,0 | Mainboard v13:5,4_3,0 | PAD1, PAD2, PAD3 |
| 3 | gr | Mainboard v13:CHIP-LED0603_259 | LED1, LED3, LED4 |
| 2 | 10k | Mainboard v13:R0603_334 | R3, R4 |
| 2 | 10n | Mainboard v13:C0603_334 | C46, C53 |
| 2 | 33u | Mainboard v13:C1206_334 | C56, C58 |
| 2 | MP34DT05 | Mainboard v13:HCLGA4 | IC4, IC5 |
| 2 | NA | Mainboard v13:C0402_334 | C42, C44 |
| 2 | STMPS2151STR | Mainboard v13:SOT23-5 | IC2, IC6 |
| 1 | 0p5 | Mainboard v13:C0402_334 | C33 |
| 1 | 0p6 | Mainboard v13:C0402_334 | C43 |
| 1 | 0p8 | Mainboard v13:C0402_334 | C40 |
| 1 | 100p | Mainboard v13:C0402_334 | C38 |
| 1 | 1p5 | Mainboard v13:C0402_334 | C41 |
| 1 | 1u | Mainboard v13:C0603_334 | C45 |
| 1 | 2n7 | Mainboard v13:R0402_334 | R7 |
| 1 | 330k | Mainboard v13:R0603_334 | R11 |
| 1 | 3n | Mainboard v13:R0402_334 | R6 |
| 1 | 3n9 | Mainboard v13:R0402_334 | R8 |
| 1 | 4-1734742-0 | Mainboard v13:TE-4-1734592-0 | PWR1 |
| 1 | 470R | Mainboard v13:L1206 | L8 |
| 1 | 47p | Mainboard v13:C0402_334 | C39 |
| 1 | ANT-SMARA | Mainboard v13:ANT-SMA-RA | ANT1 |
| 1 | ASE-4.000MHZ-LC-T | Mainboard v13:OSCI-ASE | Q1 |
| 1 | FL520WFMT1 | Mainboard v13:CRYSTAL-7M | Q2 |
| 1 | ICM-20689 | Mainboard v13:QFN24-4X4-P | IC7 |
| 1 | LIS3MDL | Mainboard v13:VFLGA-12 | IC8 |
| 1 | LP5907MFX-3.3 | Mainboard v13:SOT23-5L | IC11 |
| 1 | LT24 | Mainboard v13:LT24 | IC3 |
| 1 | LT3080ST | Mainboard v13:SOT223 | IC12 |
| 1 | Power | Mainboard v13:KT11 | SW2 |
| 1 | Reset | Mainboard v13:BUTTON4 | SW1 |
| 1 | SDCARD | Mainboard v13:SDCARD | SD1 |
| 1 | SKY66112 | Mainboard v13:SMCM-22 | IC9 |
| 1 | STM32H743ZST | Mainboard v13:LQFP144-ST | IC1 |
| 1 | SX1280 | Mainboard v13:QFN24L | IC10 |
| 1 | TE-FPC-1MM-10H | Mainboard v13:TE-1-84952-0 | LEDS1 |
| 1 | TE-FPC-1MM-8V | Mainboard v13:TE-1734248-8 | IDD1 |
| 1 | USBATE | Mainboard v13:USBA-TE | USB1 |
| 1 | rd | Mainboard v13:CHIP-LED0603_259 | LED2 |
More from TIGERs-Mannheim/electronics
8- 4 layers90 × 80 mm

- 4 layers58 × 85 mm

- 2 layers90 × 41 mm

- 2 layers140 × 85 mm

- 2 layers95 × 94 mm

- 2 layers82 × 14 mm

- 2 layers15 × 17 mm

- 2 layers10 × 51 mm

Similar boards
- 4 layers80 × 85 mm

Mainboard v13
DVA490-474-Project-Course/SSL-Hardware-Development
Contains all hardware related material. (No software).
118 partsMIT - 4 layers55 × 20 mm

Substrate PocketMusic3
SubstrateElectronics/SoundStick
An eraser sized music player/walkie-talkie supporting Bluetooth and SD card playback.
66 parts1CERN-OHL-W-2.0 - 4 layers33.2 × 85.9 mm

Sensor board
owl-and-goat/sensor-board
general-purpose thread-based iot home automation sensor board
104 parts - 4 layers43 × 65 mm

- 4 layers103.5 × 85 mm

CaesarV2
luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.
155 parts2 - 4 layers35 × 30 mm

V c3 4layer
felixfelix-bot/balloon-fresh
Open-source pico-balloon hardware and firmware, multi-radio LoRa/FLRC mesh networking, ground stations, and RF range-test tooling.
17 parts - 4 layers191.8 × 123 mm

Rdf kicad
megmem044/Portfolio
This repo consists the source code for the different projects listed on my resume
265 parts - 4 layers43.2 × 43.2 mm

Pogobot head
nekonaute/pogobot
Pogobot is an open-source open-hardware robotic platform for swarm robotics
140 parts21
Questions
How big is the Mainboard v13 PCB?
It measures 80 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mainboard v13 use?
118 parts, built around the SKY66112-11, LIS3MDL, MP34DT05 and ICM-20689. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mainboard v13 KiCad files?
From the TIGERs-Mannheim/electronics repository on GitHub, at the commit this page was made from: the board is v2020/KiCad9/Mainboard v13/Mainboard v13.kicad_pcb and its schematic v2020/KiCad9/Ball Detection v4/Ball Detection v4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mainboard v13 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TIGERs-Mannheim before reusing the design.