

ThormasMK2-circuit
- Size
- 100 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 136
- Pads
- 417
- Tracks, vias
- 1,115, 157
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jul 2024
- Updated
- 2 Aug 2024
Overview
ThormasMK2-circuit is an open-source printed circuit board by Thrcot, from the Thrcot/ThormasMK2-circuit repository on GitHub. It is a 2-layer board of 100 × 66 mm with 117 parts on 136 nets, routed with 1,115 tracks and 157 vias.
It is built around the AZ1117CH-3.3TRG1 and MMBT3904. Its parts include 36 resistors, 31 capacitors, 14 diodes, 10 connectors and 7 ICs. It belongs with the ESP32, STM32 and RISC-V boards of this library.
Main components
2AZ1117CH-3.3TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 10V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +10 |
| 19 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C10, C12, C15, C16, C17, C18, C19, C20, C21, C24, C28, C29, C31, C33 +3 |
| 14 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2, SW3, SW4, SW5, SW6 |
| 4 | 10pF | Capacitor_SMD:C_0402_1005Metric | C22, C23, C30, C32 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C25 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R25, R33 |
| 2 | 120uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R36, R37 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R34, R35 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | LOGO | Logo:JLCPCB | G***, G*** |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 350mA | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 8mHz | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | AZ1117CH-3_3TRG1 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | Ball | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Camera | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J5 |
| 1 | Catch | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J7 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LOGO | Logo:Yukuyuku | G*** |
| 1 | LOGO | Logo:Thrcot-Mini | G*** |
| 1 | LOGO | Logo:Thrcot | G*** |
| 1 | LOGO | Logo:toarugizyutusya | G*** |
| 1 | LOGO | Logo:Kairo_Enzyou | G*** |
| 1 | LOGO | Logo:GotyuumonohaKairoDesuka | G*** |
| 1 | Line | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MotorDriver | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | PWR_IN | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J1 |
| 1 | ST-LINK | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J8 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | STM32F446RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | Seed_XIAO_ESP32C3 | xiao ESP32C3_PCB:Seed_XIAO_ESP32C3 | IC1 |
| 1 | Speaker | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J9 |
| 1 | ~ | OLED:SSD1306 | U5 |
| 1 | ~ | BMX055DIP:BMX055DIP | U6 |
| 1 | ~ | DFPlayerMini:DFPlayerMini | U4 |
The 116 most common of 117 parts.
More from Thrcot/ThormasMK2-circuit
5- 2 layers92.2 × 92.2 mm

- 2 layers49.4 × 20 mm

- 2 layers59.5 × 70 mm

- 2 layers47.9 × 70 mm

- 2 layers78 × 28.9 mm

Similar boards
- 4 layers112.1 × 102.1 mm

WarpSE
garrettsworkshop/WarpSE
WIP 25 MHz MC68HC000-based accelerator card for Macintosh SE
146 parts26 - 4 layers99.6 × 76.2 mm

- 4 layers67.3 × 48.5 mm

- 4 layers99.1 × 66 mm

2057-ICE40HX4K TQ144-breakout
johnwinans/2057-ICE40HX4K-TQ144-breakout
Minimal Raspberry PI breakout board for ICE40HX4K FPGA
75 parts25 - 2 layers58.8 × 55.7 mm

AiO i2s DAC
martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth
102 parts24MIT - 2 layers50 × 36 mm

SNAC2IEC Breakout
venice1200/MiSTer_SNAC2IEC
Commodore/CBM IEC Adapter for MiSTer FPGA
28 parts21GPL-3.0 - 2 layers51 × 15.5 mm

- 2 layers99 × 75.7 mm

Questions
How big is the ThormasMK2-circuit PCB?
It measures 100 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ThormasMK2-circuit use?
117 parts, built around the AZ1117CH-3.3TRG1 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ThormasMK2-circuit KiCad files?
From the Thrcot/ThormasMK2-circuit repository on GitHub, at the commit this page was made from: the board is Main/Main.kicad_pcb and its schematic Ball/Ball.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ThormasMK2-circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask Thrcot before reusing the design.