2 layers82 × 54.8 mm
Motherboard rev 2
hpvdt/falcon_motherboard
Firmware and hardware designs for the Falcon motherboard
67 parts
2 layers72.3 × 42.8 mm
SleepMonitor rounded
ThomLalcte/SleepMonitor- Size
- 72.3 × 42.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 57
- Pads
- 214
- Tracks, vias
- 220, 94
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Jan 2024
- Updated
- 16 Jan 2024
Overview
SleepMonitor rounded is an open-source printed circuit board by ThomLalcte, from the ThomLalcte/SleepMonitor repository on GitHub. It is a 2-layer board of 72.3 × 42.8 mm with 62 parts on 57 nets, routed with 220 tracks and 94 vias.
It is built around the ESP32-WROOM-32D, LM358 and 2N7002K, with the SS54 among its other parts. Its parts include 15 resistors, 14 capacitors, 6 connectors, 5 transistors and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R9, R10, R14, R16, R17 |
| 8 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C7, C8, C10, C13, C14 |
| 5 | 2N7002K | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2, Q3, Q4, Q6 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R11, R12 |
| 4 | 47u | Capacitor_SMD:CP_Elec_6.3x5.7 | C4, C5, C6, C9 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3, JP4, JP5, JP6 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5, J6 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | 1meg | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 22u | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C11 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 470u | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U3 |
| 1 | Jumper_2_Open | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMC555xMM | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U1 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | Piezo | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Y1 |
| 1 | SS54 | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | ~ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U4 |
The 58 most common of 62 parts.
Questions
How big is the SleepMonitor rounded PCB?
It measures 72.3 × 42.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SleepMonitor rounded use?
62 parts, built around the ESP32-WROOM-32D, LM358, 2N7002K and SS54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SleepMonitor rounded KiCad files?
From the ThomLalcte/SleepMonitor repository on GitHub, at the commit this page was made from: the board is SleepMonitor-rounded.kicad_pcb and its schematic SleepMonitor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SleepMonitor rounded design in my own project?
Its repository states no licence, so its author keeps all rights: ask ThomLalcte before reusing the design.
Similar boards
- 2 layers60 × 100 mm
PaLampa MoBo H00
Vedatori/PaLampa
Mechanickou část lze rozdělit na dvě hlavní části - spodní krabici a horní lampu. Vnější části krabice jsou vyřezány z překližky na laserové řezačce a obsahují zámkové západky.
80 parts4 - 4 layers222 × 100 mm
HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1 - 2 layers77.1 × 86.5 mm
- 2 layers56.8 × 68.6 mm
- 4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 4 layers86.6 × 85.1 mm
- 2 layers64.9 × 47.3 mm
Universal battery charger
ArthorH/PD-UniCharger
Universal power delivery charger with battery reverse polarity protection
64 partsCERN-OHL-P-2.0