

The awesome and tiny pl0nk mechanical keyboard !
- Size
- 229.7 × 77.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 167
- Nets
- 112
- Pads
- 747
- Tracks, vias
- 820, 100
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Sep 2025
- Updated
- 20 Sep 2025
Overview
Plank is an open-source printed circuit board by thomas-maurice, from the thomas-maurice/pl0nk repository on GitHub. It is a 2-layer board of 229.7 × 77.9 mm with 167 parts on 112 nets, routed with 820 tracks and 100 vias.
It is built around the RP2040, AMS1117 and 1N4148WT, with the WS2812B and ABM8-272-T3 among its other parts. Its parts include 57 diodes, 47 switches, 27 capacitors, 8 resistors and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching DiodesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdThe pl0nk mechanical keyboard
This is the repo to hold the KiCad, CAD and firmware files for the pl0nk mechanical keyboard, my home-made 12x4
ortholinear mechanical keyboard.

What's in this repo ?
This repo contains everything you need to build your own. The KiCad project has annotated components that will allow you to send the project directly to JLCPCB for manufacturing with the proper bill of materials and so on. (The JLCPCB plugin for KiCad is required for that)
- The KiCad project lives in
kicad/ - The QMK firmware lives in
firmware/(copy this folder in yourqmk_firmware/keyboards/pl0nk) - The CAD files for the plates live in
CAD/
Why would you do that ?
I did it because I like mechanical keyboards and it was a cool challenge to build it from scratch.
What's inside ?

The board is powered by an RP2040 microcontroller, much like the ones you could find inside raspberry pi picos.
It also feature 10 addressable ws2812b LEDs for underglow, and cherry MX compatible hotswap socket mounts.

How does it assemble ?
You can design a case for it if you want, but I suck at CAD so I designed the top and bottom plates in KiCad and got them manufactured this way. You then sandwich the plates together and voilà !
Parts
167| Qty | Value | Footprint | References |
|---|---|---|---|
| 47 | 1N4148WT | Diode_SMD:D_SOD-523 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +31 |
| 47 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +31 |
| 20 | 100nF | PCM_JLCPCB:C_0402 | C11, C12, C13, C14, C15, C16, C17, C19, C20, C21, C22, C23, C24, C25, C26, C27 +4 |
| 12 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 10 | WS2812B | PCM_JLCPCB:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D48, D49, D50, D51, D52, D53, D54, D55, D56, D57 |
| 3 | 1uF | PCM_JLCPCB:C_0402 | C8, C10, C18 |
| 2 | 10uF | PCM_JLCPCB:C_0402 | C1, C4 |
| 2 | 15pF | PCM_JLCPCB:C_0402 | C2, C3 |
| 2 | 1kΩ | PCM_JLCPCB:R_0402 | R1, R5 |
| 2 | 27Ω | PCM_JLCPCB:R_0603 | R3, R4 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R6, R7 |
| 2 | Tactile Button, 160gf | PCM_JLCPCB:SW_TS-1088-AR02016 | BOOT1, RST1 |
| 1 | 10kΩ | PCM_JLCPCB:R_0402 | R2 |
| 1 | 4.7kΩ | PCM_JLCPCB:R_0402 | R8 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117 | PCM_JLCPCB:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U2 |
| 1 | Connector, USB-TYPE-C-16P | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 1 | LOGO | Silkscreens:triforce | G*** |
| 1 | LOGO | Silkscreens:arrow | G*** |
| 1 | LOGO | Silkscreens:raspberry pi | G*** |
| 1 | LOGO | Silkscreens:openhardware | G*** |
| 1 | LOGO | Silkscreens:this is fine | G*** |
| 1 | LOGO | Silkscreens:earth | G*** |
| 1 | LOGO | Silkscreens:arrow2 | G*** |
| 1 | LOGO | Silkscreens:loss | G*** |
| 1 | LOGO | Silkscreens:golang | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q128 | PCM_JLCPCB:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U3 |
Similar boards
- 2 layers304.8 × 95.2 mm

- 2 layers51.6 × 98 mm

- 2 layers99.5 × 124.8 mm

B Sides 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
151 parts3 - 6 layers40 × 40 mm

Integrated FOC Stepper Driver
chpaxson/Echo-Telepresence
UC Berkeley ME 135/235 Spring 2025 Term Project
77 parts2 - 2 layers91.5 × 71.5 mm

Neurodots
ki-manufaktur/neurodots
This project is inspired by the 3D printed 4x4 Colour Dot Puzzle by Sebastian Coddington and featured in Hackaday: Color Dot Puzzle Will Wrinkle Your Brain.
74 parts2 - 4 layers76.3 × 99.3 mm

- 4 layers39.7 × 56.8 mm

- 4 layers68 × 75 mm

Questions
How big is the Plank PCB?
It measures 229.7 × 77.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plank use?
167 parts, built around the RP2040, AMS1117, 1N4148WT and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plank KiCad files?
From the thomas-maurice/pl0nk repository on GitHub, at the commit this page was made from: the board is kicad/plank.kicad_pcb and its schematic kicad/matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plank design in my own project?
Its repository states no licence, so its author keeps all rights: ask thomas-maurice before reusing the design.