2 layers108.6 × 31.9 mm
Transformerless Power Supply
thisisarjun18/PCB-PROJECTS
PCB design projects created in KiCad, including schematic capture, PCB layout, routing, and hardware prototyping.
18 parts
2 layers61.5 × 34 mm
Bridge Rectifier Layout
thisisarjun18/PCB-PROJECTSPCB design projects created in KiCad, including schematic capture, PCB layout, routing, and hardware prototyping.
- Size
- 61.5 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 5
- Pads
- 18
- Tracks, vias
- 18, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Jun 2026
- Updated
- 22 Jun 2026
Overview
Bridge Rectifier Layout is an open-source printed circuit board by thisisarjun18, from the thisisarjun18/PCB-PROJECTS repository on GitHub. It is a 2-layer board of 61.5 × 34 mm with 10 parts on 5 nets, routed with 18 tracks and 0 vias.
Its parts include 5 diodes, 2 connectors, 1 capacitor and 1 resistor. It belongs with the interfaces and adapters boards of this library.
README
Project-01-Triple-LED-PCB/README.mdProject 01 - Triple LED PCB
A simple 3-channel LED indicator PCB designed in KiCad.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P3.50mm | C1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | LED | LED_THT:LED_D10.0mm | D5 |
The 9 most common of 10 parts.
Questions
How big is the Bridge Rectifier Layout PCB?
It measures 61.5 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bridge Rectifier Layout use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bridge Rectifier Layout KiCad files?
From the thisisarjun18/PCB-PROJECTS repository on GitHub, at the commit this page was made from: the board is Project-02 - Full Wave-Bridge-Rectifier/Bridge Rectifier Layout.kicad_pcb and its schematic DC motor Speed Controller/DCmotorSpeedController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bridge Rectifier Layout design in my own project?
Its repository states no licence, so its author keeps all rights: ask thisisarjun18 before reusing the design.
More from thisisarjun18/PCB-PROJECTS
2- 2 layers55.5 × 44.5 mm
Triple led 1st kicad project
thisisarjun18/PCB-PROJECTS
PCB design projects created in KiCad, including schematic capture, PCB layout, routing, and hardware prototyping.
7 parts
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0