

GuitarDistortion
Electronic circuit files
- Size
- 69.6 × 51.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 41
- Pads
- 147
- Tracks, vias
- 237, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jun 2025
- Updated
- 23 Feb 2026
Overview
GuitarDistortion is an open-source printed circuit board by this-tony-person, from the this-tony-person/circuits repository on GitHub. It is a 4-layer board of 69.6 × 51.6 mm with 68 parts on 41 nets, routed with 237 tracks and 0 vias.
It is built around the TL072 and ACJS-MV-3. Its parts include 26 resistors, 15 capacitors, 5 diodes, 3 transistors and 3 connectors.
Main components
2Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8, R18, R21, R24, R25 |
| 5 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R10, R11, R23 |
| 3 | 0.47uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C2, C8, C9 |
| 3 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19, R20, R31 |
| 3 | 2SC2240 (or 2N3904BU) | CustomFootprints:TO-92L_Inline | Q1, Q2, Q3 |
| 3 | D1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D8 |
| 2 | 100KB | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | VR1, VR2 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R22 |
| 2 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R15 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R30 |
| 2 | 470K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R7 |
| 2 | 47nF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C1, C3 |
| 2 | 6.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R17 |
| 2 | ACJS-MV-3 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J1, J2 |
| 1 | 0.01uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C10 |
| 1 | 0.022uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C11 |
| 1 | 0.047uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C13 |
| 1 | 0.1uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C12 |
| 1 | 100pF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C7 |
| 1 | 100uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C23 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1uF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C14 |
| 1 | 20KB | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | VR3 |
| 1 | 22R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 250pF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C4 |
| 1 | 3PDT | Connector_JST:JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical | SW1 |
| 1 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R39 |
| 1 | 47uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C15 |
| 1 | 68nF | CustomFootprints:C_Disc_D5.1mm_W3.2mm_P2.54mm | C5 |
| 1 | Barrel_Jack_Switch | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | GND | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | LED (5mm) | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | D9 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | V1 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP5 |
| 1 | V2 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP6 |
| 1 | V3 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP7 |
| 1 | V4 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP8 |
| 1 | V5 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP9 |
| 1 | VCC | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | VEff | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP10 |
| 1 | VIn | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP4 |
| 1 | VOut | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP11 |
| 1 | VRef | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
More from this-tony-person/circuits
3- 4 layers69.6 × 51.6 mm

- 2 layers70 × 42 mm

- 2 layers53.5 × 43 mm

Similar boards
- 2 layers165 × 103.8 mm

Output pcb
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack
128 parts116 - 2 layers148 × 84.5 mm

Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers58 × 110 mm

- 2 layers37 × 113.9 mm

- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers27.9 × 101.6 mm

MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT
Questions
How big is the GuitarDistortion PCB?
It measures 69.6 × 51.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GuitarDistortion use?
68 parts, built around the TL072 and ACJS-MV-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GuitarDistortion KiCad files?
From the this-tony-person/circuits repository on GitHub, at the commit this page was made from: the board is guitarDistortion/guitarDistortion.kicad_pcb and its schematic THAT/THAT_chip_v2/THAT_chip_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GuitarDistortion design in my own project?
Its repository states no licence, so its author keeps all rights: ask this-tony-person before reusing the design.