2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers89.5 × 85.5 mm
Temperature Sensor Module
Thinker-Thinker/Nithub-Probation-tasksContains Solution to NitHub Tasks
- Size
- 89.5 × 85.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 30
- Pads
- 43
- Tracks, vias
- 39, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Feb 2025
- Updated
- 23 Feb 2025
Overview
Temperature Sensor Module is an open-source printed circuit board by Thinker-Thinker, from the Thinker-Thinker/Nithub-Probation-tasks repository on GitHub. It is a 2-layer board of 89.5 × 85.5 mm with 3 parts on 30 nets, routed with 39 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 1 IC and 1 connector. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdNithub-Probation-tasks
Contains Solution to NitHub Hardware Probation Tasks
author: Jokomba Quyum Adeola (THINKER)
Design and assemble a circuit using Arduino or Raspberry Pi to control an LED strip based on ambient light levels (use an LDR sensor). Develop a PCB design (using KiCad or Eagle) for a temperature sensor module that communicates with the central hub. Write firmware for an ESP32 to send sensor data (temperature, humidity) to a cloud server via MQTT. Implement a security feature using a PIR motion sensor to trigger an alarm when motion is detected. Optimize power consumption for a battery-powered IoT device by implementing sleep modes.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J1 |
| 1 | TMP36xS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
Questions
How big is the Temperature Sensor Module PCB?
It measures 89.5 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Temperature Sensor Module use?
3 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temperature Sensor Module KiCad files?
From the Thinker-Thinker/Nithub-Probation-tasks repository on GitHub, at the commit this page was made from: the board is Task-2/Temperature_Sensor_Module.kicad_pcb and its schematic Task-2/Temperature_Sensor_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temperature Sensor Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask Thinker-Thinker before reusing the design.
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
