Skip to the content
2 layers20.3 × 54.6 mmUltrogothe, the printed circuit board in 3D

Module STM32 debugger USB-C

Size
20.3 × 54.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
49
Pads
131
Tracks, vias
401, 204
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 May 2024
Updated
21 Sep 2025

Overview

Ultrogothe is an open-source printed circuit board by Thierry-oshw, from the Thierry-oshw/Ultrogothe repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 20.3 × 54.6 mm with 18 parts on 49 nets, routed with 401 tracks and 204 vias.

It is built around the 1N5819WS. Its parts include 9 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.

Main components

1

README

README.md

Ultrogothe

Module STM32 debugger USB-C

Parts

18
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0402_1005MetricC5, C6, C7, C8, C9
2100kResistor_SMD:R_0402_1005MetricR1, R2
21uFCapacitor_SMD:C_0402_1005MetricC1, C2
220pFCapacitor_SMD:C_0402_1005MetricC3, C4
2Conn_01x20Chimere_comps:PinHeader_1x20_P2.54mm_SimpleJ1, J2
11N5819WSDiode_SMD:D_SOD-323D1
1Conn_02x07_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMDJ5
1CrystalCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1STM32F103CBTxPackage_QFP:LQFP-48_7x7mm_P0.5mmU2
1XC6206PxxxMRPackage_TO_SOT_SMD:SOT-23-3U1

Similar boards

  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 6 layers55 × 95 mmEcho r1-rev1, the printed circuit board in 3D

    Echo r1-rev1

    amachronic/echoplayer

    Echo - Open Hardware Music Player

    154 parts281CERN-OHL-S-2.0
  • 4 layers37.1 × 37.2 mmDoorman, the printed circuit board in 3D

    Doorman

    AzonInc/Doorman

    ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

    44 parts252GPL-3.0
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 6 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    300 parts189MIT
  • 2 layers53 × 53 mmHair electrolysis machine, the printed circuit board in 3D

    Hair electrolysis machine

    zoemaestra/hair-electrolysis-machine-usb-c

    A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB

    83 parts168CERN-OHL-P-2.0

Questions

How big is the Ultrogothe PCB?

It measures 20.3 × 54.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ultrogothe use?

18 parts, built around the 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ultrogothe KiCad files?

From the Thierry-oshw/Ultrogothe repository on GitHub, at the commit this page was made from: the board is Ultrogothe.kicad_pcb and its schematic Ultrogothe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ultrogothe design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).