
AgentDeck
Brillar0101/agentdeck
RP2040 macropad for supervising AI coding agents: 13 hot-swap keys with per-key RGB status, encoder, joystick, 4-layer PCB, CircuitPython firmware, printable enclosure

When I saw the claude code macropad meme image I thought: "I can make this happen", and so I did.
Macro keyboard PCB is an open-source printed circuit board by thiagolocatelli, from the thiagolocatelli/claude-code-macropad-meme repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 133.4 × 79.5 mm with 56 parts on 66 nets, routed with 400 tracks and 116 vias.
It is built around the RP2040, W25Q128JVSIQ and AMS1117-3.3, with the USBLC6-2SC6 and ABM8-272-T3 among its other parts. Its parts include 16 capacitors, 9 diodes, 8 resistors, 4 ICs and 2 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
When I saw the claude code macropad meme image I thought: "I can make this happen", and so I did.
build without VIA support
qmk compile -kb claudecode -km defaultbuild with VIA support
qmk compile -kb claudecode -km via| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C14 |
| 9 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
| 2 | SW | PCM_marbastlib-various:SW_SPST_SKQG_WithStem | RST1, RST2 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_3u | S1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | PCM_marbastlib-various:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Aron_footprint:SOIC127P790X216-8N | U3 |

Brillar0101/agentdeck
RP2040 macropad for supervising AI coding agents: 13 hot-swap keys with per-key RGB status, encoder, joystick, 4-layer PCB, CircuitPython firmware, printable enclosure

ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design




alph4345/test
TrinketCore puts everything a small rechargeable gadget needs on one 40 × 60 mm board, ready to order assembled from PCBWay:

cespinal117/Film-Camera-Lightmeter
A PCB I designed to integrate a light meter onto my film camera

enkhbold470/kicad-projects
Five KiCad 10 boards (4- and 6-layer): ESP32-S3 industrial gateway, USB-C PD bench supply, RP2040 logic analyzer, FOC motor controller, iCE40 FPGA board.
It measures 133.4 × 79.5 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the RP2040, W25Q128JVSIQ, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thiagolocatelli/claude-code-macropad-meme repository on GitHub, at the commit this page was made from: the board is PCB/Macro keyboard PCB.kicad_pcb and its schematic PCB/Macro keyboard PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).